Safety Warnings
WARNING
Children have died from furniture tipover. To reduce the risk of furniture tipover:
- ⚠️ ALWAYS install anti-tip device provided.
- ❌ NEVER put a TV on this product.
- ❌ NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- ❌ NEVER open more than one drawer at a time.
- Place heaviest items in the lowest drawers.
Parts List
The following parts are included:
- 6x Screw (Part ID: 109571)
- 24x Dowel (Part ID: 118331)
- 24x Cam Lock (Part ID: 102533)
- 29x Dowel (Part ID: 101350)
- 40x Dowel (Part ID: 101345)
- 4x Screw (Part ID: 157967)
- 8x Bolt (Part ID: 104171)
Assembly Instructions
Step 1: Prepare Side Panels
Insert 12 dowels (Part ID: 118331) into the pre-drilled holes on each of the two long side panels.
Step 2: Attach Horizontal Supports
Insert dowels (Part ID: 101350) into the ends of the horizontal support pieces. Align these dowels with the corresponding holes on the side panels and press them together. Ensure correct orientation of the support pieces as indicated.
Step 3: Secure with Cam Locks
Insert cam locks (Part ID: 102533) into the larger holes on the horizontal pieces and turn them to lock onto the dowels from the side panels.
Step 4: Attach Vertical Supports
Insert dowels (Part ID: 101350) into the ends of the vertical support pieces. Align these with the holes on the main frame and press them into place. Ensure correct orientation.
Step 5: Secure Vertical Supports
Insert cam locks (Part ID: 102533) into the appropriate holes and turn to lock the vertical supports to the frame.
Step 6: Prepare Shelf Slats
Insert dowels (Part ID: 101345) into the ends of the shelf support slats. A total of 40 dowels are used in this step.
Step 7: Attach Shelf Slats
Insert dowels (Part ID: 101350) into the side frames. Attach the prepared shelf support slats to the side frames, aligning them with the dowels.
Step 8: Secure Shelf Slats
Use cam locks (Part ID: 102533) to fasten the shelf support slats securely to the side frames.
Step 9: Attach Top Panel
Insert dowels (Part ID: 101350) into the top edges of the side panels. Place the top panel onto the structure, aligning the holes with the dowels.
Step 10: Secure Top Panel
Use cam locks (Part ID: 102533) to fasten the top panel to the side frames.
Step 11: Position Unit
Carefully turn the assembled frame over to its upright position.
Step 12: Attach Back Panel
Insert dowels (Part ID: 101350) into the back edges of the frame. Align the back panel with these dowels and press it into place.
Step 13: Secure Back Panel
Use screws (Part ID: 109571) to fasten the back panel to the frame.
Step 14: Attach Feet
Screw the adjustable feet (Part ID: 157967) into the designated holes at the bottom of the unit.
Step 15: Level the Unit
Stand the unit upright. Adjust the feet to level the unit on uneven floors. The feet can be adjusted up or down.
Step 16: Install Anti-Tip Device
Attach the provided bracket to the top of the unit using screws. Secure the other end of the anti-tip strap to the wall. Ensure you use appropriate wall fixings for your wall type (wall mounting hardware not included).
Note: The diagram shows a warning against using incorrect wall fixings.
Step 17: Insert and Secure Shelves
Place the shelves into the unit. Secure each shelf using bolts (Part ID: 104171) and cam locks (Part ID: 102533).
