Dining Table Assembly Instructions
Model: 16084TBK-HD01
Attention
- Prior to assembly, lay out and identify all parts as listed.
- Tighten all nuts and bolts securely. Hand-tighten all bolts before use.
- If you experience difficulty or find missing/damaged parts, please contact AECOJOY customer support.
Parts List
| Identifier | Description | Quantity |
|---|---|---|
| A | Table Top | 1 PC |
| D | Table Leg | 4 PCS |
| E | Base | 1 PC |
| F | M6*30 Screw | 16 PCS |
| G | Washer | 16 PCS |
| H | Hex Key | 1 PC |
Assembly Steps
Step 1: Attach Legs to Base
Description: Attach the 4 Table Legs (Part D) to the Base (Part E). Use 4 M6*30 screws (Part F) and 4 Washers (Part G) for each leg, securing them with the Hex Key (Part H). Ensure all screws are tightened securely after alignment.
Visual Aid: Diagram shows the Base (E) and 4 Table Legs (D) being connected using screws (F) and washers (G).
Step 2: Attach Base Assembly to Table Top
Description: Place the Table Top (Part A) upside down on a protected surface. Position the assembled Base/Legs unit onto the underside of the Table Top. Secure the Base/Legs unit to the Table Top using the remaining M6*30 screws (Part F) and Washers (Part G). Ensure all connections are firm.
Visual Aid: Diagram shows the Base/Legs assembly being attached to the Table Top (A) using screws (F) and washers (G).
