16084098BK Assembly Instructions
Table Assembly
Attention
1. Prior to assembly, make sure you lay out and identify all the parts as listed below are received.
2. Tighten all nuts and bolts securely. All bolts should be hand tightened before use.
3. Should you experience any difficulty during assembly or if any parts are missing or damaged, please feel free to contact us.
Parts List (Table)
- A: Table Top (1PC) - Description: A rectangular tabletop with a slatted surface.
- B: Table Leg (4PCS) - Description: Metal legs designed to attach to the tabletop.
- C: Base (1PC) - Description: A central metal structure connecting the table legs.
- D: M6*30 Bolts (16PCS) - Description: Metal bolts with hexagonal heads.
- E: Washers (16PCS) - Description: Flat metal rings.
- F: Hex Key (1PC) - Description: An L-shaped tool for tightening bolts.
Assembly Guide (Table)
Note: Please do not fix screws tightly before all the screws are aligned. Tighten all screws at last.
Step 1
Attach two Table Legs (B) to the underside of the Table Top (A) using M6*30 Bolts (D) and Washers (E). Ensure bolts are hand-tightened.
Step 2
Attach the remaining two Table Legs (B) to the underside of the Table Top (A) using M6*30 Bolts (D) and Washers (E). Ensure bolts are hand-tightened.
The table is now assembled.
Chair Assembly
Attention
1. Prior to assembly, make sure you lay out and identify all the parts as listed below are received.
2. Tighten all nuts and bolts securely. All bolts should be hand tightened before use.
3. Should you experience any difficulty during assembly or if any parts are missing or damaged, please feel free to contact us.
Parts List (Chair)
- A: Chair Back (2PCS) - Description: Metal frame structures for the chair backrests.
- B: Right Leg (2PCS) - Description: Metal legs for the right side of the chairs.
- C: Left Leg (2PCS) - Description: Metal legs for the left side of the chairs.
- D: Chair Seat (2PCS) - Description: Metal frame structures for the chair seats.
- E: M6*15 Bolts (20PCS) - Description: Metal bolts with hexagonal heads.
- F: M6*30 Bolts (4PCS) - Description: Metal bolts with hexagonal heads.
- G: Washers (24PCS) - Description: Flat metal rings.
- H: Hex Key (1PC) - Description: An L-shaped tool for tightening bolts.
Assembly Guide (Chair)
Note: Please do not fix screws tightly before all the screws are aligned. Tighten all screws at last.
Step 1
Attach a Chair Back (A) to a Right Leg (B) and a Left Leg (C) using M6*30 Bolts (F) and Washers (G). Hand-tighten the bolts.
Step 2
Attach the second Chair Back (A) to the remaining Right Leg (B) and Left Leg (C) using M6*30 Bolts (F) and Washers (G). Hand-tighten the bolts.
Step 3
Attach a Chair Seat (D) to the assembled leg and back structure using M6*15 Bolts (E) and Washers (G). Hand-tighten the bolts. Repeat for the second chair.
The chairs are now assembled.
