7PCS Metal Patio Furniture Set
Assembly Instructions
Attention
Thanks for choosing our product.
- There will be 2 boxes in total for this whole product. Before assembling, please check you receive all the parts listed below. If there is any missing or damaged part, or if you have any question, please feel free to contact our service team for help.
- Two persons are recommended to assemble the set.
- Recommend to use a waterproof furniture cover for the entire furniture set when it is used outdoors to keep them longer lifetime.
- Sofa cushion covers can be removed and cleaned by a cleaner when there are stains.
Package A Parts List
- A: Screws (M6x35) - Quantity: 33
- B: Screws (M6x28) - Quantity: 22
- C: Screws (M6x15) - Quantity: 12
- D: Washers (M6) - Quantity: 67
- E: Metal Bracket - Quantity: 2
- F: Connector - Quantity: 4
- G: Slatted Panel - Quantity: 3
- H: Chair Leg Frame - Quantity: 1
- I: Chair Frame - Quantity: 2
- J: Side Frame - Quantity: 2
- K: Seat Cushion - Quantity: 3
- L: Back Cushion - Quantity: 7
- M: Armrest Frame - Quantity: 1
- T: Stool Frame - Quantity: 3
- V: Stool Leg - Quantity: 6
Package B Parts List
- I: Chair Frame - Quantity: 2
- L: Back Cushion - Quantity: 7
- N: Chair Leg Frame - Quantity: 1
- O: Tabletop - Quantity: 1
- P: Chair Frame - Quantity: 1
- Q: Table Leg Frame - Quantity: 1
- R: Table Support - Quantity: 2
- S: Table Frame - Quantity: 1
- T: Stool Frame - Quantity: 3
- U: Stool Seat - Quantity: 3
Assembly Instructions
Step 1
Required Parts: G x 1, J x 1, A x 3, D x 3
Description: Attach one slatted panel (G) and one side frame (J) to a base structure using three screws (A) and three washers (D).
Step 2
Required Parts: H x 1, A x 4, D x 4
Description: Attach one chair leg frame (H) to the structure using four screws (A) and four washers (D).
Step 3
Required Parts: I x 1, A x 4, D x 4
Description: Attach one chair frame (I) to the structure using four screws (A) and four washers (D).
Step 4
Required Parts: K x 1, L x 2
Description: Place one seat cushion (K) and two back cushions (L) onto the assembled chair frame (I).
Step 5
Required Parts: G x 1, J x 1, A x 3, D x 3
Description: Attach one slatted panel (G) and one side frame (J) to another base structure using three screws (A) and three washers (D).
Step 6
Required Parts: M x 1, A x 4, D x 4
Description: Attach one armrest frame (M) to the structure using four screws (A) and four washers (D).
Step 7
Required Parts: N x 1, A x 4, D x 4
Description: Attach one chair leg frame (N) to the structure using four screws (A) and four washers (D).
Step 8
Required Parts: K x 1, L x 2
Description: Place one seat cushion (K) and two back cushions (L) onto the assembled chair frame (N).
Step 9
Required Parts: G x 1, O x 1, A x 3, D x 3
Description: Attach one slatted panel (G) and one tabletop (O) to a base structure using three screws (A) and three washers (D).
Step 10
Required Parts: P x 1, A x 4, D x 4
Description: Attach one chair frame (P) to the structure using four screws (A) and four washers (D).
Step 11
Required Parts: I x 1, A x 4, D x 4
Description: Attach one chair frame (I) to the structure using four screws (A) and four washers (D), likely connecting a corner section.
Step 12
Required Parts: K x 1, L x 3
Description: Place one seat cushion (K) and three back cushions (L) onto the assembled corner chair frame (I).
Step 13
Required Parts: Q x 1, R x 2, B x 6, D x 6
Description: Attach one table leg frame (Q) and two table supports (R) to the table frame (S) using six screws (B) and six washers (D).
Step 14
Required Parts: S x 1, B x 4, D x 4
Description: Attach the table frame (S) to the structure using four screws (B) and four washers (D), completing the table base assembly.
Step 15
Description: The diagram shows the completed table assembly.
Step 16
Required Parts: T x 1, V x 2, B x 4, D x 4 (Repeat 3 times for 3 stools)
Description: Assemble three stools by attaching one stool frame (T) and two stool legs (V) using four screws (B) and four washers (D) for each stool.
Step 17
Required Parts: C x 4, D x 4 (Repeat 3 times for 3 stools)
Description: Secure the stool assembly by attaching components using four screws (C) and four washers (D) for each stool.
Step 18
Required Parts: U x 1 (Repeat 3 times for 3 stools)
Description: Place one stool seat (U) onto each of the three assembled stool frames.
Step 19
Required Parts: F x 4
Description: Secure the assembled sections and components using four connectors (F). The diagram shows the final arrangement of the 7-piece patio furniture set, including the sectional sofa, coffee table, and stools.
