Numatic Henry Allergy HVA160-11

Kit AS9 Assembly

The Numatic Henry Allergy HVA160-11 comes with the following components:

• Hose
• Extension Tubes
• Floor Tool
• Crevice Tool
• Upholstery Brush
• Dusting Brush

Assembly involves connecting the hose to the machine, attaching extension tubes, and then connecting the appropriate tool to the end of the tube.

Diagram Description: Shows the assembly of the hose and tubes, and attachment of various tools to the end of the wand.

Using Your Machine

Locate the 'Start' button and the 'Power On Indicator Light' on the machine.

The machine features adjustable suction power, indicated by 'Low' and 'High' settings. Use the controls to select the desired suction level.

Diagram Description: Illustrates the power switch, indicator light, and suction control settings (Low/High). Shows how to connect the hose to the machine and how to use different floor tools with arrows indicating movement and suction.

Cleaning Your Machine

Follow these steps for cleaning and maintenance:

1. Release the top handle and lift the machine head off the bin.
2. Release the bin lid clips.
3. Lift the bin lid.
4. Remove the Tritex filter (Part No. 907073).
5. Clean the filter and the inside of the machine.
6. Remove the dust bag.
7. Dispose of the dust bag correctly.
8. Replace the filter and dust bag.
9. Reassemble the machine.

Diagram Description: A step-by-step visual guide showing how to disassemble the vacuum cleaner, remove the filter and dust bag, clean components, and reassemble the unit.

Changing the Filter

To change the filter:

1. Unlock the filter housing.
2. Remove the old filter.
3. Install the new filter, ensuring it is correctly seated.
4. Lock the filter housing.

Diagram Description: Shows the process of unlocking the filter housing, removing the old filter, and installing a new filter (e.g., 907044 H13 Filter).

Floor Tool Cleaning

Instructions for cleaning the floor tool are provided, which may involve detaching parts for thorough cleaning.

Diagram Description: Shows how to disassemble and clean the floor tool, including removing brushes or wheels.

Wand Docking and Tool Tidy

The machine may feature wand docking capabilities for convenient storage of the cleaning wand and tools.

Diagram Description: Illustrates how the vacuum wand can be docked onto the machine and how accessories can be tidied.

Schematic Diagram

The electrical schematic diagram shows the basic circuit including power input (L, N), switches, a capacitor, a resistor, and the motor (M).

Replacement Parts

Technical Data

About Your Machine (Rating Label)

The rating label provides essential information about the machine:

• Company Name & Address: Numatic International Limited, Chard, Somerset TA20 2GB, UNITED KINGDOM
• Model: HVA160-11
• Voltage / Alternating Current
• Frequency
• Rated Input Power
• Weight
• WEEE Logo
• Protection Class 2 Symbol
• Approval Mark
• Machine yr/wk Serial Number

Maintenance

Daily:

• Keep the machine clean, including hoses and tubes.
• Ensure the dust bag and filter are fitted correctly.
• Regularly examine the power cord for damage.
• Check the dust bag frequently.
• Check filters are clean.

Weekly:

• As per daily checks, plus:
• Check for any worn or damaged parts and replace them immediately.

WEEE Legislation (Waste, Electrical and Electronic Equipment):

Vacuum cleaner, accessories, and packaging should be sorted for environmentally-friendly recycling. Do not dispose of vacuum cleaners into household waste. Vacuum cleaners that are no longer suitable for use must be separately collected and sent for recovery in an environmentally-friendly manner, in accordance with European Directive 2012/19/EU.

PPE (Personal Protective Equipment):

The following PPE may be required for certain operations:

• Ear Protection [ear protection icon]
• Safety Footwear [safety footwear icon]
• Head Protection [head protection icon]
• Safety Gloves [safety gloves icon]
• Eye Protection [eye protection icon]
• Protective Clothing [protective clothing icon]
• Dust / Allergens Protection [dust/allergens protection icon]
• Hi Viz Jacket [hi viz jacket icon]
• Caution Floor Sign [caution floor sign icon]

NOTE: A risk assessment should be conducted to determine which PPE should be worn.

Safety Critical Components:

Mains leads: HO5-V2V2-F 10 m x 2 Core x 0.75 mm²

For issues or breakdowns, contact your Numatic dealer or the Numatic Technical helpline: +44 (0)1460 269268.

Information for DRY Use Vacuum Cleaners

WARNING:

• Read the instruction manual before using the machine.
• Operators must be adequately instructed on the use of their machine.
• Exercise care and attention during use, and ensure routine and preventative maintenance is carried out periodically for safe operation.
• Failure to carry out necessary maintenance, including part replacement to the correct standard, could render the equipment unsafe. The manufacturer accepts no responsibility in this respect.
• Maintenance should only be carried out by a qualified person.
• This machine is for DRY USE only and must not be stored outside or used in wet conditions.
• Disconnect from the mains power by removing the plug from the power supply socket during cleaning, maintenance, or when replacing parts.
• Only use the machine's socket outlet for purposes specified in the instructions (if fitted).
• This machine is not intended for use by children or persons with reduced physical, sensory, or mental capabilities, or lack of experience or knowledge.
• This appliance is intended to be cleaned and maintained by an adult.
• Children should be supervised and not play with the machine.
• This machine is not a toy.
• This machine is not suitable for picking up hazardous or explosive dust. Contact your local distributor for machines capable of such tasks.

CAUTION:

• Ensure the filtration system fitted is suitable for the material being collected.
• This vacuum cleaner is intended for indoor use for collecting dry materials only.
• This machine should be stored indoors only.

NOTES:

• The primary use for this machine is commercial (e.g., hotels, schools, hospitals, factories, shops, offices).
• This product complies with IEC/EN 60335-2-69 Stability and Mechanical Hazards requirements.
• The vacuum cleaner is fitted with a thermal protection device. If it stops working, remove the plug from the wall before investigating.
• If the vacuum cleaner has a blockage: switch off, remove the plug, inspect the floor tool, tubes, and hose. If clear, replace the dust bag and clean the filter.
• The vacuum cleaner should be inspected for damage after use.
• Store the vacuum cleaner in a dry place.
• Consider the machine's weight when moving it.

DO:

• Keep your machine clean, including hoses and tubes.
• Change dust bags frequently.
• Keep filters clean.
• Keep the diffuser filter (where fitted) clean.
• Use filter bags for enhanced performance and to keep the machine clean.
• Use a Numatic Original filter bag for fine dust conditions.
• Keep hoses and tubes clear.
• Replace any worn or damaged parts immediately.
• Only use the brushes provided with the machine; others may impair safety.
• Regularly examine the power cord. If damage (cracking, ageing) is found, it must be replaced by a qualified person.
• Only replace the power cord with a correct Numatic approved replacement part.

DO NOT:

• Pull on the cable to unplug the machine from the power supply.
• Use to suck up hot ashes or lighted cigarette ends.
• Use steam cleaners or pressure washers to clean the machine, or use in the rain.
• Immerse the machine in water for cleaning.
• Attempt machine maintenance or cleaning unless the power supply plug has been removed.
• Use in wet environments or to collect wet materials.
• Place foreign objects (e.g., air fresheners, capsules, scented beads) into the top filter of the machine, as this can be dangerous and may invalidate the warranty.

Allergy Information:

Allergy UK considers that the HVA 160-11 (Henry Clean Air) may, with proper use, reduce exposure to house dust mite and cat allergens. Assessments indicate that individual exposure can be reduced, but this does not guarantee a reduction in allergic symptoms.

Warranty Information

Numatic International Limited warrants its products to be free of defects in material or workmanship for the period shown:

• Homecare and Cleancare Vacuum cleaners: 2 Years
• Rotary Floor Machines: 2 Years
• Twintec Auto Scrubber Dryer: 1 Year
• Vario Ride-On Scrubber Dryer: 1 Year / 1500 hours
• Mopping, Compacts, Combi and Servocare Products: 1 Year
• Individual Accessories and Spare Parts: 6 Months

Note: Consumable parts like carbon brushes, floor brushes, mops, and batteries are excluded as they are subject to normal wear and tear.

Using non-Numatic dustbags can be detrimental to machine performance and life, and may invalidate the warranty.

Warranty claims must be processed through the dealer from whom the equipment was purchased. Contact Numatic International Limited if the original dealer cannot fulfil obligations, providing full claim details and proof of purchase.

Claims are limited to the specific faulty part. Claims will not be accepted for fair wear and tear, misuse, or abuse.

Numatic International Limited reserves the right to charge for unnecessary work carried out due to invalid claims.

Declaration of Conformity

Numatic International Limited declares that the product (HVA, NVR Vacuum Cleaner - Commercial - Dry) is in conformity with the following directives and standards:

• Supply of Machinery Regulations (S.I. 2008:1597)
• EMC Regulations (S.I. 2016:1091)
• Ecodesign Requirements for Vacuum Cleaners (2009/125/EC EU/666/2013)
• RoHS Regulations (S.I. 2012:3032)
• Relevant standards include EN60335 series, EN62233, EN55014 series, EN61000 series, and EN60312-1:2017.

The declaration is made by Mr. Matthew Coles, Head of Technology, Numatic International Limited, Chard, Somerset, TA20 2GB, UK, dated 5th February 2024.

The document also contains declarations of conformity in multiple languages.

Numatic International Contact Information

Numatic International Limited (Head Office)

Chard, Somerset TA20 2GB, UNITED KINGDOM

Tel: 01460 68600 | numatic.com

Other International Offices:

• Germany: Numatic International GmbH, Tel: +49 (0) 511 984 2160, numatic.de
• Denmark: Numatic International Denmark, Tel: +45 (0) 316 40808, numatic-online.dk
• France: Numatic International S.A.S, Tel: +33 (0) 164 726 161, numatic.fr
• Netherlands: Numatic International BV, Tel: +31 (0) 172 467 999, numatic.nl
• Switzerland: Numatic International Schweiz AG., Tel: +41 (0) 41 768 0760, numatic.ch
• South Africa: Numatic International (PTY) Ltd., Tel: +27 (0) 861 686 284, numatic.co.za
• Portugal: Numatic International ULDA, Tel: +351 220 047 700, numatic.pt
• Spain: NUMATIC INTERNATIONAL SPAIN, S.L.U., Tel: +34 93 647 22 22, numatic.es
• Italy: Numatic International Italy S.R.L, Tel: +39 (0) 434 046 211, numatic.it

Specifications are subject to change without prior notice.