Numatic Vacuum Cleaners
Model Series: NA1 - NS1 - AS0 - AH29
This document provides original instructions and operational guidance for Numatic vacuum cleaner models including NRV 240-11, NSR 240-11, NRV 370-11, NRV 380-11, NRV 470-11, and EVR 370-11.
CAUTION: Read instructions before using the machine.
Visit www.numatic.co.uk for more information.
Accessory Kits
- Kit NA1 / NS1: Includes hose, floor tool, extension tubes, crevice tool, and brush.
- Kit AH29: Includes hose, floor tool, extension tubes, crevice tool, and brush.
- EVR 370 - Kit AS0: Includes hose, floor tool, extension tubes, crevice tool, and brush.
Assembly
Follow these steps for assembly:
- Connect the hose to the machine's air inlet.
- Connect the extension tubes together.
- Attach the floor tool to the end of the extension tubes.
- Adjust the floor tool height for optimal cleaning (approximately 50mm clearance from the floor).
- Insert a filter bag into the machine.
- Securely close and fasten the machine's lid.
Using Your Machine
Locate the 'Start' button and observe the 'Power On Indicator Light'. Adjust suction power using the control dial, typically marked with '+' and '-' symbols to indicate different levels. The floor tool can be adjusted for different floor types and suction settings (Low/High).
Cleaning and Maintenance
General Cleaning:
- Keep the machine, including hoses and tubes, clean.
- Ensure the dust bag and filter are correctly fitted.
- Regularly examine the power cord for any signs of damage.
- Check the dust bag and filters frequently, ensuring they are clean.
- Check for any worn or damaged parts and replace them immediately.
EVR 370-11 Tool Head Cleaning: Specific instructions are provided for cleaning the tool head, involving disassembly and cleaning of its components.
WEEE Legislation: Vacuum cleaner, accessories, and packaging should be sorted for environmentally friendly recycling. Do not dispose of vacuum cleaners into household waste; they must be collected separately for recovery.
Fitting and Docking
- Fitting the Face: Diagrams show how to attach the front faceplate.
- Removing the Face: Diagrams show how to detach the front faceplate.
- Wand docking / Tool Tidy: Illustrations demonstrate how to store the hose, tubes, and tools on the vacuum cleaner unit.
Handle Fitting and Data
470 Handle Fitting: A diagram illustrates the process of attaching the handle assembly.
Specifications Data:
| Model | Drum Size | Cleaning Range | Weight (Ready to work) | Sound Pressure | Protection Class | Dimensions |
|---|---|---|---|---|---|---|
| NRV/NSR 240 | 9 L | - | 9.0 kg | LpA ≤ 70 dB(A) | Class II | 360 mm x 370 mm x 415 mm |
| NRV 370 | 15 L | 31.8 m | 9.1 kg | 360 mm x 370 mm x 510 mm | ||
| NRV 380 | 15 L | - | 9.1 kg | 355 mm x 355 mm x 485 mm | ||
| NRV 470 | 27 L | - | 11.6 kg | 358 mm x 450 mm x 710 mm | ||
| EVR 370 | 15 L | 26.8 m | 9.1 kg | 360 mm x 370 mm x 510 mm |
Replacement Parts
- TriTex Filter: Part No. 604165 (TriTex-Filter)
- HepaFlo Bags:
- Part No. 604015: NVM 1CH (Pack of 10) for 240 Drum Size
- Part No. 604016: NVM 2BH (Pack of 10) for 370 / 380 Drum Size
- Part No. 604018: NVM 3AH (Pack of 10) for 470 Drum Size
For best performance, ensure you use genuine Numatic bags.
Rating Label and Safety
Rating Label Details:
- 1. Company Name & Address: Numatic International Ltd, Chard, ENGLAND TA20 2GB
- 2. Model: (Specific to machine)
- 3. Voltage / Alternating Current: (Specific to machine)
- 4. Frequency: (Specific to machine)
- 5. Rated Input Power: (Specific to machine)
- 6. Weight: (Specific to machine)
- 7. WEEE Logo: Symbol indicating WEEE compliance.
- 8. Protection Class 2 Symbol: Indicates double insulation.
- 9. Approval Mark: (Specific to machine)
- 10. Machine yr/wk Serial Number: (Specific to machine)
Maintenance Schedule:
- Daily: Keep machine clean, ensure bag/filter fitted, examine power cord, check dust bag, check filters.
- Weekly: Check for worn or damaged parts and replace immediately.
Personal Protective Equipment (PPE):
The following PPE may be required for certain operations. A risk assessment should be conducted to determine which PPE should be worn:
- Ear Protection
- Safety Footwear
- Head Protection
- Safety Gloves
- Eye Protection
- Protective Clothing
- Dust / Allergens Protection
- Hi Viz Jacket
- Caution Floor Sign
Safety Critical Components:
Mains leads are specified as:
- (220-240 Volt) HO5-V2V2-F 12.5m x 2 Core x 0.75 mm²
- (220-240 Volt) HO5-V2V2-F 12.5m x 2 Core x 1.00 mm²
- (110 Volt) HO5-V2V2-F 10m x 2 Core x 1.50 mm² Yellow Cable + Industrial Plug
WARNING: Read the instruction manual before using the machine. Operators shall be adequately instructed. Exercise care and attention during use. Routine and preventative maintenance is crucial for safe operation. Maintenance should only be carried out by a qualified person. This machine is for DRY USE only and must not be stored outside or used in wet conditions. Disconnect from mains before cleaning or maintenance. Not for use by children or persons with reduced capabilities. Not a toy. Not suitable for hazardous or explosive dust. Contact your local distributor for specialized tasks.
CAUTION: Ensure filtration system is suitable for material being collected. Intended for indoor use for dry materials only. Store indoors.
NOTES: Primary use is commercial (hotels, schools, hospitals, factories, shops, offices). Complies with IEC/EN 60335-2-69. Features a thermal protection device. If the machine stops, remove the plug before investigating. For blockages, switch off, unplug, inspect tool/tubes/hose, clear debris, replace bag, and clean filter. Inspect after use for damage. Store in a dry place.
- DO: Keep machine clean, change dust bag frequently, keep filters clean, use filter bags, use genuine bags for fine dust, keep hoses clear, replace worn parts, use provided brushes, examine power cord, use approved replacement cord.
- DO NOT: Pull cable to unplug, suck hot ashes/cigarette ends, use steam cleaners/pressure washers, immerse in water, clean/maintain without unplugging, use in wet environments, place foreign objects (e.g., air fresheners) in filter.
Schematic Diagram and Dust Bags
A simple electrical schematic diagram illustrates the basic circuit components of the vacuum cleaner.
HepaFlo Dust Bags:
- Part No. 604015: NVM 1CH (Pack of 10) for 240 Drum Size
- Part No. 604016: NVM 2BH (Pack of 10) for 370/380 Drum Size
Declaration of Conformity
Numatic International Limited declares, under its sole responsibility, that the products conform to the specified directives and standards. Manufacturer: Numatic International Limited, Chard, Somerset TA20 2GB. Product Description: Vacuum Cleaner - Commercial - Dry. This declaration covers various Numatic models and lists compliance with directives such as Machinery Directive, EMC Directive, Ecodesign Requirements, RoHS Directive, and relevant EN standards.
Warranty Information
Numatic International Limited warrants its products against defects in material or workmanship for the following periods:
- Homecare and Cleancare Vacuum cleaners: 2 Years
- Rotary Floor Machines: 2 Years
- Twintec Auto Scrubber Dryer: 1 Year
- Vario Ride-On Scrubber Dryer: 1 Year / 1500 hours
- Mopping, Compacts, Combi and Servocare Products: 1 Year
- Individual Accessories and Spare Parts: 6 Months
The warranty excludes consumable parts (e.g., carbon brushes, floor brushes, mops, batteries) and damage caused by using non-Numatic dustbags. Warranty claims must be processed through the dealer. Claims are specific to faulty parts and do not cover wear and tear, misuse, or abuse. Proof of purchase and evidence of validity are required.
Distributor Information
Distributed by: Numatic International Limited.
Address: Numatic International Limited, Chard, Somerset TA20 2GB ENGLAND.
Telephone: 01460 68600.
Website: www.numatic.co.uk.
Specification subject to change without prior notice.
