Anslut Solar Lantern LED

Safety Instructions

• The product is intended for outdoor, decorative lighting only.
• This product is not a toy. Keep children under supervision to ensure they do not play with it.
• Do not place the product near flammable materials.
• Do not expose the battery to fire or high temperatures.
• The lamp and solar panel are weather-resistant but must not be immersed in water or other liquids.
• Never look directly into the light source when it is illuminated.
• The light source is not replaceable. If the product stops working, it must be discarded.
• Do not attempt to charge batteries with a mains-powered battery charger or power the product from the mains.

Rechargeable Batteries

IMPORTANT: When replacing batteries, use only rechargeable batteries.

• Always purchase the correct size and type of battery intended for this use.
• Remove batteries from the product if it will not be used for an extended period.
• Used batteries must be disposed of in accordance with applicable regulations.

Symbols

• CE: Approved in accordance with relevant directives and regulations.
• Protection Class III: Class III protection.
• Recycling Symbol: Recycle discarded product as electrical waste according to applicable regulations. ♻️

Technical Data

Use and Positioning

Place the product so that it is exposed to full sunlight for at least 6 hours per day. Placement in shade will result in poorer battery charging and reduced lighting time. Do not place the product near strong light sources, such as street lighting, as this may cause the product to switch off automatically.

First Time Use

Set the switch to the ON position. On some models, a protective paper must also be removed from the battery. The product is automatically controlled by a light sensor. At sunset, the product automatically turns on and operates using the energy stored in the battery.

NOTE: Even if the battery is fully charged at the factory, the voltage may have dropped upon delivery. Therefore, the battery should be fully charged before the product is put into use. Place the product under an artificial light source for 24 hours with the switch in the OFF position. This charging procedure can ideally be repeated regularly during the winter months when daylight is often insufficient to fully charge the battery.

User Tips

• The product is controlled by ambient light and is designed to turn on after sunset. If there are strong light sources nearby, the product may shine less brightly or not at all.
• Keep the solar panels clean. Dirt on the panel surface obstructs light and impairs charging.
• Expected lighting time: Summer: 6 to 8 hours. Winter: 1 to 4 hours.

Maintenance

• Avoid scratching the surface of the solar panel and keep it free from dust and debris.
• Wipe the solar lamp with a soft, damp cloth if necessary.

Environmental Care

Recycle discarded products in accordance with local regulations.