Anslut LED Spotlights (Item 015777)
Brand: Anslut
Safety Instructions
- Do not connect the product to the mains while it is still in the packaging.
- Intended for outdoor use.
- Check that no light sources are damaged.
- No parts of the product can be replaced or repaired. If any part is damaged, the whole product must be discarded.
- Do not use sharp or pointed objects during assembly.
- Do not subject the power cord or wires to mechanical stress.
- This is not a toy. Be careful if using the product near children.
- Disconnect the transformer from the power point when the product is not in use.
- This product must never be connected directly to a power point without the transformer.
- This product must only be connected to the supplied transformer.
- The product is not intended to be used as general lighting.
- Recycle products that have reached the end of their useful life according to local regulations.
WARNING! The string of lights may only be used if all seals are fitted correctly.
Diagram Description
The diagram shows the product setup: a power plug connected to a transformer, which is then connected via a cable to two stake-mounted LED spotlights. The wiring allows for a series connection of the spotlights.
Symbols
- CE: [CE Mark]
- Class III: [Class III Symbol]
- Recycling: Recycle discarded product in accordance with local regulations. ♻️
Technical Data
| Parameter | Value |
|---|---|
| Rated voltage | 6 V DC / 230 V ~ 50 Hz |
| Output | 2 x 3 W |
| Protection rating | IP44 |
| Colour temperature | 3000 K |
| Luminous flux | 270 Im |
| Colour rendering index | RA > 80 |
| Cord length | 4 + 2 m |
Use and Connection
- Put the lights in the required place.
- Route the power cord so that there is no risk of it being exposed to a lawn mower or other damage.
- Connect the power cord to the transformer.
- Plug the transformer into the mains.
Environmental Care
Recycle discarded products in accordance with local regulations.
