Lumary Smart Gimbal Light Start Manual

Product & Notes

What's in the Box

• Lumary Smart Gimbal Light
• Lumary Smart Gimbal Light Start Guide

Get Ready

• Know your Wi-Fi network and password.
• Make sure your mobile device is running iOS 13.3 or higher and Android 9.0 or higher.
• Make sure you're connecting to a 2.4GHz Wi-Fi network (Lumary can't connect to 5GHz networks).

Attention

1. Do handle carefully in transportation.
2. Do not disassemble the fixture for non-professional repairs.
3. The fixture works under AC high voltage and current; it should be installed where it can't be touched easily. The connection must be completely sealed and earthed.
4. The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
5. The light source contained in this luminaire shall only be replaced by the manufacturer or its service agent or a similarly qualified person.
6. The surface where it's positioned must be firm enough to ensure safety.
7. Ensure the voltage of the electricity system is in the range of working voltage for the fixture. Otherwise, the lifetime of fixtures will be influenced.
8. Installation and maintenance should be operated by a professional.

Installation Instructions

IMPORTANT

Read all instructions before installing fixtures. Retain for future reference.

SAFETY

For your safety, this fixture must be wired in accordance to local electrical codes and ordinances. All work should be done by a qualified electrician.

WARNING

Make certain power is OFF from the electrical panel before starting installation or attempting any maintenance. Indoor installation only.

PRE-INSTALLATION

1. Turn power OFF from the electrical panel before starting installation.
2. Locate a suitable position to plate the fixture and open in accordance to the cut-hole dimensions (refer to Hole CutTable for appropriate size).
3. Run electrical wire from the switch (power supply) through the mounting hole-use NMD90 Romex or BX cable.

DRIVER WIRING

1. Open the hardwire box swing cover and remove the appropriate knockout(s).
2. Insert the electrical supply cable through the knockout and secure with a cable connector (sold separately).
3. Using wire nuts, connect green ground wire of cable to green wire on box. Connect white wire of cable to white wire of box. Connect black wire of cable to black wire of box. (See Fig.1).
4. Place all wiring and connections back in to the box and close the cover.

Continued Installation

1. Insert hardwire box through the mounting hole. (See Fig.2). For new construction applications, the hardwire box shall be firmly secured to studs, joists, or similar fixed structural units. For remodel applications, the hardwire box may not require to be firmly secured after the mounting plates, studs, joists, or structural units have been concealed.
2. Junction box suitable for maximum of 5 No 12 AWG or 8 No 14 AWG Conductors.

FIXTURE INSTALLATION

1. Connect the fixture to the hardwire box by inserting and twisting the male/female connectors. (See Fig.3).
2. Push spring loaded clips on the fixture upwards and insert fixture base in to the mounting hole. Release the clips and fixture will be pulled flush to the ceiling. (See Fig.4).
3. Once assembly is complete, turn on power to confirm fixture is flashing white.

Fig.1: Wiring diagram illustrating connections between the power supply, ground, neutral (white), and live (black) wires, and the cable leading to the fixture.

Fig.2: Illustration showing the hardwire box being inserted through a pre-cut hole in the ceiling.

Fig.3: Diagram depicting the connection of the fixture's connector (labeled 1) to the hardwire box's connector (labeled 2).

Fig.4: Illustration showing the fixture's spring clips (labeled 1) being pushed upwards to allow insertion into the mounting hole, and then released to secure the fixture flush against the ceiling.

Lumary App Setup & Connection

Install the "Lumary" App

Find and install the "Lumary" App on the App Store or Google Play. The app allows you to manage your Lumary devices, connect to Wi-Fi, and control multiple devices.

Register a Lumary Account

Open the Lumary App. Select your region and country. Enter your email address and tap "Get Verification Code". Follow the on-screen instructions to complete registration.

Log In

Enter your registered email address and password, then tap "Log In" to access your Lumary account.

Connect Device

NOTE: Lumary's products cannot connect to 5GHz networks.

Steps:

1. Advised to enable Bluetooth on your mobile device to add Wi-Fi devices easily.
2. Each time the device without distribution network is powered on, confirm the light is breathing or blinking in pairing mode.
3. Open the Lumary App. In the top corner of the Devices screen, click "+" and select "Add Device" to confirm that the device is paired.
4. If the device is not found, you need to use the wall switch to reset: on-off-on-off-on.
5. Find the device, choose your Wi-Fi network and enter the password, then press "Next". Click "Add", and wait patiently. After that, click "Done", and the device is successfully added to the App.
6. Other ways to add devices: Open the Lumary App, click "+", choose "Lighting", select "Light Source (BLE + Wi-Fi)", then select "AP Mode" or "EZ Mode" in the upper right corner.

Group Control

Create a Group

Log in to the Lumary App. Tap a smart device and enter its settings by clicking the edit icon (✏️) in the top right corner.

Tap "Create Group", then select the devices you wish to include in the group and save.

Name and Control Group

You can reset the group name and save it. The group can then control devices collectively.

Beacon Remote Control

Remote Overview

Description of the remote control layout:

• ON/OFF button (Power symbol ?)
• Night Light button (Moon symbol ?)
• 7 Colors button (Color wheel symbol ?)
• Brightness+ button (Sun symbol ☀️)
• Temperature+ button (Warm color symbol ?)
• Group B button (Button B)
• Scene button (Scene icon)
• Temperature- button (Cool color symbol ❄️)
• Brightness- button (Sun symbol ☀️)
• Group A button (Button A)
• Group C button (Button C)
• Group D button (Button D)

Remote Pairing

Note: Not all Lumary devices are compatible with the remote control. Downlights of models A/B/C/D/F manufactured after January 2022 are compatible.

1. The device is powered by 2xAAA dry batteries.
2. The lighting device needs to be paired with the App through the mobile phone first.
3. For devices that have completed network configuration to the App, keep the network unblocked.
4. Turn off the device through the wall switch, and then turn on the switch after 5 seconds. Within 1 minute of power-on, the lighting device and remote control are in a pairing state.
5. Long press any key on the remote control A/B/C/D as needed until the device flashes to indicate success. If during the configuration process, the required device is not fully paired, long press the group button again until all devices are paired. If it times out, repeat step 4.

Troubleshooting

Connectivity Issues

• Can't connect to your Wi-Fi network: Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
• Fail to bind device: You will need two phones, one to set the hotspot and the other to connect the hotspot and add the device through the app. The problem may be in the router; check your router Settings to see if there are MAC and DHCP restrictions. Lumary's products do not support 5GHz networks.
• Device Appears offline or is unreachable: Make sure your Wi-Fi router is online and in range, and check that you have the latest Lumary functionality by clicking "Check for firmware update" in your device settings. Try to turn off the device, clear the application cache, reboot the router, turn on the device after one minute, and check and confirm the device status after five minutes.

Device Behavior

• Flickering occurs: Lumary's products are factory set to the default network configuration. If the device has not been connected to the network, it will flash for three minutes each time it is powered on. If the device is connected to the network, it will stop flashing and will automatically connect to the network when it is switched off and on via the wall switch after 15 seconds.

General Questions

• What should I do, if I don't have internet access to my Lumary product? If you do not have a network, you will need two mobile phones, one to set up the hotspot and the other to connect to the hotspot and add the device via the app (refer to the guide).
• If my Wi-Fi internet goes down, will Lumary App still work? Lumary products need to be connected to Wi-Fi in order to use them remotely, and the device can be controlled simply using the app via the LAN as well as Bluetooth. For example: on, off, dimming, colour temperature, colors.
• Can I share with family and friends? Yes, you can share access to your Lumary devices. In the Lumary App, from your main device list, click on one of the devices, press the "..." button on the top right and click on "Share Device" to give or revoke sharing permissions. In order to share, the other user should already have downloaded the Lumary App and registered an account.
• Can I group multiple Lumary devices together? Yes, you can group multiple same-type devices by room, location, or however else you want. The same devices can be in multiple groups. For example, if you create a group for "Bedroom" and another group for “Entire House", your Bedroom lights can be included in both groups. From your main device list, click on one of the devices you want to group, press the "..." button on the top right for advanced settings, and click "Create Group". You'll be able to name a new group and choose which devices you'd like to group together.
• My Lumary device has a funny name. How do I rename it? From your main device list, click on one of the devices you want to rename, press the "..." button on the top right for advanced settings, and click "Modify Device Name" (or "Modify Group Name"). You'll then be able to choose a more familiar name. It will automatically connect to the network when it is switched off and on via the wall switch after 15 seconds.
• What's the wireless range? The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.
• How many devices can I control?
  • The maximum number of timers that can be added to a single device: 30
  • Maximum number of devices that can be added in a single home: 120
  • The maximum number of Tap-to-Run that a single home can create: 100
  • Maximum number of Automation that can be created in a single home: 100
  • The maximum number of tasks that can be added in a Tap-to-Run: 150
  • The maximum number of tasks that can be added in an Automation: 150
  • The maximum number of conditions that can be added in an Automation: 10
  • The maximum number of mobile devices that can simultaneously log in to an account is: 200
  • The maximum number of Homes that can be created by a single App account is: 20
  • The maximum number of home members that can be added in a single home is: 20
  • The maximum number of rooms that a single home can create is: 20
  • The maximum number of devices that can be added in a single room is: 50
  • The maximum number of devices that can be added in a single device group is: 100
  • The maximum number of device groups that a single home can create is: 20
  • The maximum number of each device group that can be shared with other users is: 20
  • The maximum number of each device that can be shared with other users is: 20
  • The maximum number of each App account that can be invited by other homes is: 20
• What should I do, when I find a problem with the purchased product? Please email support@lumary.tech with your Amazon order ID. Lumary is dedicated to ensuring your 100% satisfaction and will be happy to exchange it for a new one immediately if the problem is with the product.
• How do I reset the device? If the device is connected to the network, press and hold the control button for 5s, the indicator light or light will flash rapidly and enter the network state. To reconnect to Wi-Fi: Reset the device through the wall switch, on-off - on-off - on. Reset once (press switch on - off - on - off - on) to reach Easy Mode, indicated by rapidly blinking white light. Refer to connect in Easy Mode. Reset again (press switch on - off - on - off -on) to reach AP Mode, indicated by slowly blinking white light. Refer to connect in AP Mode.

Important Information

Parameter Information

Compliance Information

Logos: FCC, RoHS, ETL, Intertek.

FCC ID: 2A7AK-PL-D4-B09

Made in China

CAUTION (FCC Compliance)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Voice Control Guide

Name and Control Each Device by Voice

Supports integration with Amazon Alexa and Google Assistant.

Logos: "works with alexa", "works with Hey Google"

Work With Amazon Alexa

1. Log in to Lumary App, tap the smart device and enter into, click the edit icon (✏️) in the top right corner.
2. Tap "Alexa" in Third-party Control.
3. Tap "Sign In With Amazon". Follow the on-screen prompts to link your accounts.
4. Tap "Allow".
5. Linked successfully. When you add a new device, there is no need to link again; just discover the new device in Alexa.

Things you can say to Alexa:

• "Alexa, discover my devices."
• "Alexa, turn on the bedroom light."
• "Alexa, set the bedroom light to orange."
• "Alexa, turn off the coffee machine."
• "Alexa, set the living room to 50%."
• "Alexa, dim porch light."
• *Some commands require compatible devices.

Work With Google Assistant

1. Log in to Lumary app, tap the smart device and enter into, click the edit icon (✏️) in the top right corner.
2. Tap "Google Assistant" in Third-party Control.
3. Tap "Link with Google Assistant". Follow the on-screen prompts to link your accounts.
4. Click "Agree and link".
5. Linked successfully. When you add a new device, there is no need to link again; just discover the new device in Google Home.

Things you can say to Google Assistant:

• "Hey Google, turn on all the lights in my bedroom."
• "Hey Google, turn off the light."
• "Hey Google, set the bedroom light to orange."
• "Hey Google, turn off the coffee machine."
• "Hey Google, set the living room to 50%."
• "Hey Google, dim porch light."
• *Some commands require compatible devices.

Support & Contact

Customer Service Email

support@lumary.tech

Find Us Online

You can also search for our "account name" and "enter URL" on social media platforms or directly scan the following QR code to find us quickly. (QR codes are excluded from this output).

• Facebook: US-Smart Home (https://www.facebook.com/Lumary-Smart-Lighting-102878658675054)
• YouTube: Lumary Official (https://www.youtube.com/channel/UCcEQnWxockzsPwyPOfSppug)
• Instagram: lumary Smart Home (https://www.instagram.com/lumarysmartlights/)
• Twitter: Lumary @Lumarysmarthome (https://twitter.com/Lumarysmarthome)
• Pinterest: Lumary Smart Home (https://www.pinterest.com/LumarySmartHome/)

Need Help?

Can't connect? Need help? Having an easy talk to Lumary support before you return the product will fix a problem more quickly.

Lumary support: support@Lumary.tech

Visit us at:

• www.lumary.tech
• www.lumarysmart.com