Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Base Pole | x1 |
| B | Lower Arm | x1 |
| C | Upper Arm | x1 |
| D | VESA Plate | x1 |
| E | Clamp Mount | x1 |
| F | Grommet Mount Plate | x1 |
| G | Pole Collar | x1 |
| H | Connecting Bolt | x1 |
| I | VESA Screw (M8x25) | x1 |
| J | VESA Screw (M8x25) | x1 |
| K | Pole Screw (M8x70) | x1 |
| L | Pole Screw (M8x150) | x1 |
| M | Allen Key (4mm) | x1 |
| N | Arm Screw (6mm) | x1 |
| M-A | VESA Screw (M4x12) | x4 |
| M-B | VESA Screw (M5x12) | x4 |
| M-C | VESA Screw (D5) | x4 |
Assembly Instructions
Step 1a: Desk Clamp Installation
Attach the Clamp Mount (E) to the Base Pole (A). Ensure the pole is placed within the clamp's designated area. Secure the clamp to the desk edge. The clamp is designed for desk thicknesses between 12mm and 50mm. ⬆️⬇️
The diagram shows the clamp (E) attaching to the pole (A), with arrows indicating placement on a desk edge.
Step 1b: Grommet Mount Installation
For desks with an existing through-hole (Ø10mm to Ø60mm), use the Grommet Mount Plate (F). Insert the pole through the hole and secure it from underneath using the provided hardware. This method is suitable for desk thicknesses between 12mm and 50mm. ⬆️⬇️
The diagram shows the grommet plate (F) being used with a desk that has a pre-drilled hole.
Step 2a: Arm Attachment (C-Clamp Base)
Connect the Lower Arm (B) to the Base Pole (A) using the Pole Screw (K) and nut. Rotate the arm to the desired position (±90° horizontal adjustment). ?
Shows the lower arm (B) connecting to the pole (A) with a screw (K) and nut. Indicates 180° rotation.
Step 2b: Arm Attachment (Grommet Base)
Connect the Lower Arm (B) to the Base Pole (A) using the Pole Screw (L) and nut. Rotate the arm to the desired position (±90° horizontal adjustment). ?
Similar to 2a, but shows the connection for the grommet base setup. Indicates 180° rotation.
Step 3: Upper Arm Attachment
Attach the Upper Arm (C) to the Lower Arm (B) using the Connecting Bolt (H) and nut. Ensure a secure connection. The arm can swivel 360° at this joint. ?
Shows the upper arm (C) being attached to the lower arm (B) with bolt (H) and nut. Indicates 360° rotation.
Step 4: VESA Plate Attachment
Attach the VESA Plate (D) to the end of the Upper Arm (C) using screws (D, B, N) and the Allen Key (M) ?. Ensure the plate is oriented correctly for your monitor.
The diagram shows the VESA plate (D) being attached to the arm (C) with screws and Allen key (M).
Step 5: Monitor Mounting
Align the monitor with the VESA Plate (D). Secure the monitor using the appropriate VESA screws (M-A, M-B, or M-C) and washers. Ensure the 'TOP' indicator on the VESA plate is oriented correctly. ⬆️
Shows a monitor being attached to the VESA plate (D) using screws M-A, M-B, M-C.
Step 6: Arm Tension Adjustment
First, position and firmly hold the arm horizontally as shown. Ask for assistance should you require it.
⚠️ CAUTION
Always keep the arm in a horizontal position.
If the arm drops, turn the adjustment knob clockwise to tighten.
If the arm rises, turn the adjustment knob counter-clockwise to loosen.
DO NOT over tighten the screws.
The diagram shows the arm being held horizontally and the adjustment knob.
Step 7: Cable Management
Route monitor and power cables along the arm using the integrated cable management clips. This helps keep the workspace tidy and prevents cables from snagging. ?
Shows cables being clipped along the arm.
Step 8: Final Adjustments
Note: If the display does not stay in position, tighten the screws as shown. ⚙️
Make final adjustments to the monitor's tilt and swivel for optimal viewing angles. ?
Shows final adjustments and rotation icons.
