Assembly Instruction
PATIO CHAISE LOUNGE
If you have any questions, please feel free to contact us. Email: lowesteam@aminalife.com
Model: WF321204
Carton Content:
A x2 B x2 C x2 D x4 E x4 F x2
Hardware
Hardware List:
1 x6 BOLT M8 x 65MM 2 x4 BOLT M8 x 45MM 3 x12 BOLT M8 x 40MM 4 x8 BOLT M6 x 60MM 5 x20 BOLT M6 x 20MM 6 x4 PLASTIC WASHER 5MM 7 x28 WASHER M8 8 x32 WASHER M6 9 x6 NUTS M8 10 x4 NUTS M6 11 x4 PART I SHORT 12 x2 ALLENKEY 13 x1 WRENCH M8 14 x1 WRENCH M6
Assembly Steps:
STEP 1
Connect The Rear Seat Body (A) & Front Seat Body (B) With AllenKey (12), Wrench (13)
Parts Used: 1 x6, 2 x4, 7 x16, 9 x6
Note: 50% tighten screws.
STEP 2
Connect The Part From Step 1 & Part I Short (12) With AllenKey (12)
Parts Used: 5 x8, 8 x8, 11 x4
Note: 50% tighten screws.
STEP 3
Connect The Front Seat Body (B) & Front Seat Frame (C) With AllenKey (12)
Parts Used: 3 x4, 7 x4
Note: 50% tighten screws.
STEP 4
Connect The Front Seat Frame (C) & Shape-u Frame (F) With Allenkey (12), Wrench (14)
Parts Used: 5 x4, 8 x8, 6 x4, 10 x4
Note: 50% tighten screws.
STEP 5
Tighten All Bolts and Nuts 100%
Note: Ensure all bolts and nuts are fully tightened.
STEP 6
Connect The Rear Seat Body (A) & Rear Chair Legs (D) With Allenkey (12)
Parts Used: 3 x4, 5 x4, 7 x4, 8 x4
Note: 100% tighten screws.
STEP 7
Connect The Front Seat Body (B) & Front Chair Legs (D) With Allenkey (12)
Parts Used: 3 x4, 5 x4, 7 x4, 8 x4
Note: 100% tighten screws.
STEP 8
Connect The Arm Chair (E) & Rear Seat Body (A), Front Seat Body (B) With Allenkey (12)
Parts Used: 4 x4, 8 x4
Note: 100% tighten screws.
STEP 9
Connect The Arm Chair (E) & Rear Seat Body (A), Front Seat Body (B) With Allenkey (12)
Parts Used: 4 x4, 8 x4
Note: 100% tighten screws.
Important Notes:
1. 50% Tighten before fixing all screws. Allen wrench is recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure it remains stable.
3. Tighten up all screws with tools gradually.
4. If screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
5. If the item is not stable, please loosen all screws, adjust it on a flat ground and tighten up all screws again.
6. If one or some screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.
Finish
Assembly is complete. Enjoy your Patio Chaise Lounge!
