Assembly Instruction

General Assembly Guidelines

• Have 2 adults on hand for assembly.
• Tighten screws to 50% before fixing all screws. An Allen wrench is recommended over an electric drill.
• Place the item on a flat ground to adjust and ensure it remains stable.
• Tighten all screws gradually.
• If screws are not aligned with holes during assembly, loosen other screws to 50% and continue the assembly process.
• If the item is not stable, loosen all screws, adjust on a flat ground, and tighten all screws again.
• Note: If some screws are fully tightened, others may not align with holes. All holes are designed to be larger to provide adjustment space.

Part List

• A: Lid Stool (1 pc)
• B: Back Frame Stool (1 pc)
• C: Front Frame Stool (1 pc)
• D: Right Stool (1 pc)
• E: Left Stool (1 pc)
• F: Bottom Frame Stool (1 pc)
• G: Bag Stool (1 pc)
• H: Cushion Stool (1 pc)
• I: Seat Bench (1 pc)
• J: Left Arm Chair (1 pc)
• K: Right Arm Chair (1 pc)
• L: Backrest (2 pcs)
• M: Back Frame Bench (1 pc)
• N: Back Canopy (2 pcs)
• O: (1 pc)
• P: (1 pc)
• Q: (1 pc)
• R: (1 pc)
• S: (2 pcs)
• T: (2 pcs)
• U: (2 pcs)
• V: (4 pcs)
• W: (2 pcs)
• X: (2 pcs)
• Y: (1 pc)
• Z: Seat Chair Cushion (2 pcs)
• 20: Canopy Fabric (1 pc)
• 21: Pillow (2 pcs)

Hardware List

• 1: M6x40mm (16 pcs)
• 2: M6x35mm (24 pcs)
• 3: M6x20mm (40 pcs)
• 4: Ø6 x 14 mm (88 pcs)
• 5: Allen Key (2 pcs)
• 6: M6x45mm (2 pcs)
• 7: M6x60mm (6 pcs)
• 8: Air Lifter 100N (1 pc)
• 9: Nuts (12 pcs)
• 10: Plastic washers 2mm Ø6 x 16 x 2 mm (10 pcs)
• 11: Plastic washers 5mm Ø6 x 16 x 5 mm (4 pcs)
• 12: Wrench (1 pc)
• 13: Part Key (2 pcs)
• 14: Part L (2 pcs)
• 15: Part I - Short (2 pcs)
• 16: Part I - Long (2 pcs)
• 17: Adjustable Foot (8 pcs)
• 18: Plastic washer 10mm Ø6 x 16 x 10 mm (2 pcs)

Assembly Steps

Step 1

Connect Right Stool (D) & Back Frame Stool (B). Tighten Bolt (1) & flat washer (4) with Allen Key (5).

Step 2

Connect Front Frame Stool (C). Tighten Bolt (1) & flat washer (4) with Allen Key (5).

Step 3

Connect Left Stool (E). Tighten Bolt (1) & flat washer (4) with Allen Key (5).

Step 4

Connect Bottom Frame Stool (F). Tighten Bolt (2) & flat washer (4) with Allen Key (5).

Step 5

Connect Lid Stool (A). Tighten Bolt (3) with Allen Key (5).

Step 6

Connect Air Lifter (8) between Lid Stool (A) & Stool. Tighten Bolt (2) & washer (4), plastic Washers (18) with Allen Key (5). Then insert the bag stool (G) with 6 buttons attached.

Step 7

Finish Stool: Put the Cushion Stool (H) on top of Stool.

Step 8

Assemble Left Arm Chair (J) & Seat Bench (I). Tighten Bolt (7) & washer (4) & nuts (9) with Allen Key (5) & Wrench (12).

Step 9

Assemble Right Arm Chair (K) & Seat Bench (I). Tighten Bolt (7) & washer (4) & nuts (9) with Allen Key (5) & Wrench (12).

Step 10

Assemble Backrest (L) & Part L (14) with Allen Key (5). Then Assemble Backrest (L) & Seat Bench (I), tighten Bolt (3) & washer (4) (10) with Allen Key (5).

Step 11

Assemble (X) & Backrest (L). Tighten Bolt (2) & washer (4) & plastic washer (10) with Allen Key (5).

Step 12

Assemble Back Frame Bench (M) & Bench. Tighten Bolt (1) & washer (4) with Allen Key (5).

Step 13

Assemble (W) & Backrest (L). Tighten Bolt (2) & washer (4) & washer plastic (10) with Allen Key (5).

Step 14

Assemble (V) & Bench. Tighten Adjustable Foot (17) with HAND.

Step 15

Assemble (T) & (U). Note: Hold (T), (U) straight with hold of (V).

Step 16

Assemble (V), (U), (T). Tighten bolt (1), Washer (4) with Allen key (5).

Step 17

Assemble (O) & (P) with (S), tighten Bolt (3), washer (4) with Allen key (5). Assemble (Q) & (R) with (S), tighten Bolt (3), washer (4) with Allen key (5).

Step 18

Assemble (Y) & Frame Step 17, tighten bolt (3), Washer (4) with Allen key (5).

Step 19

Assemble Part I-Long (16) with Frame Step 18, tighten Bolt (3), washer (4) with Allen key (5).

Step 20

Assemble Part I-Short (15) with Frame Step 19, tighten Bolt (3), washer (4) with Allen key (5).

Step 21

Assemble Frame Step (20) with Bench. Tighten Bolt (2), washer (4) with Allen key (5).

Step 22

Assemble Back Canopy (N) with Frame Step 21, tighten Bolt (3), washer (4), (11), nuts (9) with Allen key (5) and Wrench (12).

Step 23

Assemble Back Canopy (N) & Back Canopy (N). Tighten Bolt (6), nuts (9) with Allen key (5) and wrench (12).

Step 24

Assemble Part (13) with (U), tighten Bolt (3), washer (4), (10), with Allen key (5). Tighten Bolt (3), washer (4) on Back Canopy (N) with Allen key (5).

Step 25

Put Canopy Fabric (20), Seat Chair Cushion (Z), Pillow (21) on Frame and Bench.

Options for arrangement:

• Option 1
• Option 2
• Option 3
• Option 4