Assembly Instruction

PATIO CONVERSATION SET

Model Numbers: WF317154; WF317155; N715P213599; N715P213603

Please read all instructions carefully:

• Have 2 adults on hand for assembly.
• 50% Tighten before fixing all screws. An Allen wrench is recommended instead of an electric drill.
• Place the item on a flat ground to adjust and make sure it remains stable.
• Tighten up all screws with tools gradually.
• If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
• If the item is not stable, please loosen all the screws, adjust it on a flat ground and tighten up all screws again.
• Note: If one or some screws are fully tightened during assembly, chances are the others will not be aligned with holes. In addition, all the holes are designed to be relatively larger to provide more space for the adjustment of the screws.

Part List:

A - Top Table (1 pc)

B - Leg Table (4 pcs)

C - Left Armless (3 pcs)

D - Right Armless (3 pcs)

E - Leg Chair (12 pcs)

F - Seat Chair Frame (2 pcs)

G - Seat Bench Frame (1 pc)

H - Seat Bench Cushion (1 pc)

J - Back Chair Cushion (2 pcs)

K - Back Bench Cushion (2 pcs)

P - Middle Back Bench Frame (1 pc)

Hardware list:

1 - Bolt M6x15 (8 pcs) + Extra (1 pc)

2 - Bolt M6x40 (21 pcs) + Extra (2 pcs)

3 - Bolt M6x60 (8 pcs) + Extra (2 pcs)

4 - Screw Bolt M6x25 (36 pcs) + Extra (2 pcs)

5 - Connecting Flat (4 pcs) + Extra (3 pcs)

6 - Flat Washer M6 (73 pcs)

7 - Allen Key (2 pcs)

Carton Content:

WF317154; N715P213599:

• A - Top Table (1 pc)
• B - Leg Table (4 pcs)
• E - Leg Chair (12 pcs)
• F - Seat Chair Frame (2 pcs)
• Hardware
• G - Seat Bench Frame (1 pc)
• P - Middle Back Bench Frame (1 pc)
• H - Seat Bench Cushion (1 pc)
• I - Seat Chair Cushion (2 pcs)

WF317155; N715P213603:

• C - Left Armless (3 pcs)
• D - Right Armless (3 pcs)
• K - Back Bench Cushion (2 pcs)
• J - Back Chair Cushion (2 pcs)

Assembly Steps:

STEP 1: Assemble Table Top and Legs

Connect Top Table (A) & Leg Table (B). Tighten Bolt (3) and flat washer (6) with Allen Key (7) to 50%.

Diagram Description: Shows table top (A) and four table legs (B). Bolts (3) and washers (6) are used to attach the legs to the top. Allen key (7) is shown.

STEP 2: Finish Table Assembly

Put Table upright, firmly tighten Bolts with Allen Key (7) to 100%.

Diagram Description: Shows the assembled table with all legs attached and tightened.

STEP 3: Assemble Armless Chair Sides

Push and connect Left Armless (C) & Right Armless (D) using Connecting Flat (5). Tighten Bolt (1) and Flat Washer (6) with Allen Key (7) to 50%.

Diagram Description: Shows two armless chair sides (C and D) being connected with a flat piece (5) using bolts (1) and washers (6).

STEP 4: Attach Seat Frame to Armless Sides

Connect the part from step 3 & Seat Chair (F). Tighten Bolt (2) & Flat Washer (6) with Allen Key (7) to 50%.

Diagram Description: Shows the assembled armless sides being attached to the seat frame (F) using bolts (2) and washers (6).

STEP 5: Attach Chair Legs

Connect the part from Step 4 & Leg Chair (E). Tighten Screw (4) & Flat Washer (6) with Allen Key (7) to 50%.

Diagram Description: Shows the chair frame with legs (E) being attached using screws (4) and washers (6).

STEP 6: Finish Chair Assembly

Put Chair upright, firmly tighten Bolts with Allen Key (7) to 100%. Set up the Cushions (I) + (J) to finish Chair.

Diagram Description: Shows the completed chair with cushions (I and J) placed on it.

STEP 7: Assemble Loveseat Sides and Back

Push and connect Left Armless (C) & Right Armless (D) & Middle Back (P) using Connecting Flat (5). Tighten Bolt (1) & Flat Washer (6) & Allen Key (7) to 50%.

Diagram Description: Shows the armless sides (C and D) and the middle back piece (P) being connected with a flat piece (5) using bolts (1) and washers (6).

STEP 8: Attach Seat Bench Frame

Connect the part from step 7 & Seat Bench (G). Tighten Bolt (2) & Flat Washer (6) with Allen Key (7) to 50%.

Diagram Description: Shows the assembled loveseat sides and back being attached to the seat bench frame (G) using bolts (2) and washers (6).

STEP 9: Attach Loveseat Legs

Connect the part from Step 8 & Leg Chair (E). Tighten Bolt (2) & Flat Washer (6) with Allen Key (7) to 50%.

Diagram Description: Shows the loveseat frame with legs (E) being attached using bolts (2) and washers (6).

STEP 10: Finish Loveseat Assembly

Put Chair upright, firmly tighten Bolts with Allen Key (7) to 100%. Set up the Cushions (H) + (K) to finish Bench.

Diagram Description: Shows the completed loveseat with cushions (H and K) placed on it.

Assembly Options:

OPTION 1: Assembled set with one loveseat and two chairs.

OPTION 2: Assembled set with one loveseat and two chairs, arranged differently.

OPTION 3: Assembled set with one loveseat and two chairs, arranged differently.

Diagram Description: Shows three different configurations of the patio conversation set, each including a loveseat and two chairs around a coffee table.