W1703P163951/W1703P163952/W1703P163953 Hanging Chair Assembly Instructions
Warning
Be careful not to cut the seat cushion if you need to open the package.
If you have any questions, please feel free to contact us.
Email: lowesteam@aminalife.com
Parts List
| No. | Part | Qty | Description |
|---|---|---|---|
| A | Left&Right Lege base | 2 | Base legs |
| B | Hanging Baskets | 1 | Basket structure |
| C | Steel legs | 4 | Support legs |
| D | Top pole | 2 | Upper support poles |
| E | M8x50 screws | 6 | Screws |
| F | M8x15 screws | 4 | Screws |
| G | Nut (M8) | 6 | Nuts |
| H | M5/M6 Allen | 1 | Allen wrench |
| I | Safety rope | 2 | Rope for stability |
| J | Bolt | 2 | Bolts |
| K | Spring | 2 | Springs |
| L | chain | 2 | Chains |
| M | Lock | 2 | Locking mechanisms |
| N | Down Tube | 1 | Lower support tube |
| O | UP Tube | 1 | Upper support tube |
| P | M6x15 screws | 4 | Screws |
| Q | Nut (M6) | 4 | Nuts |
Assembly Steps
Step 1
Attach the Left&Right Lege base (A) to the Down Tube (N) using M8x50 screws (E) and Nuts (G). Use the Allen wrench (H) for tightening.
Step 2
Connect the Steel legs (C) to the base assembly using M8x15 screws (F) and Nuts (G). Ensure the legs are securely fastened.
Step 3
Attach the Top poles (D) to the base assembly using M8x50 screws (E) and Nuts (G). This forms the main support structure.
Step 4
Insert the UP Tube (O) into the top of the assembly. Please install the safety rope (I) before use. The rope should be secured to the top of the chair structure.
Step 5
Hang the basket structure (B) onto the assembled frame. Ensure it is balanced and stable.
Step 6
Attach the Chains (L) to the basket using Bolts (J) and Locks (M). Connect the other end of the chains to the Springs (K). The springs should then be attached to the top support structure.
Secure the basket using M6x15 screws (P) and Nuts (M6) (Q).
