aFe Power Momentum XP Cold Air Intake System

Installation Guide

This document provides comprehensive instructions for installing the aFe Power Momentum XP Cold Air Intake System. Designed for Ford F-150 and F-150 Raptor models equipped with the V6-3.5L (tt) EcoBoost engine from 2017-2020, this guide ensures a smooth and correct installation process.

Please read the entire manual before beginning. Ensure all components are present and that you have the necessary tools. For assistance, contact aFe Power customer support at 951-493-7100.

Key Components and Tools

• Components: Air Filters (Pro DRY S, Pro 5R, Pro-GUARD 7), Housing, Intake Tubes, Silicone Hoses, Clamps, Seals, and Vent Inserts. Refer to the parts list for specific part numbers.
• Required Tools: 7mm/8mm nut driver or deep sockets, flat head screwdriver, 13mm socket and driver, panel popper tool.

Installation Steps Overview

The installation process involves several key stages:

1. Removal: Safely remove the factory air intake system, including the air box, intake tubes, and associated components.
2. Installation: Install the new aFe Power Momentum XP components, including the housing, intake tubes, air filter, and necessary fittings.
3. Final Checks: Ensure all connections are secure, clamps are tightened, and the wastegate actuator is properly reconnected.

For detailed, step-by-step instructions with visual aids, please refer to the specific figures and steps outlined within this manual.

Important Note: This product is intended for race vehicles only in California and may be prohibited on public streets or highways in certain states. Always comply with local emission regulations.

For more information, visit aFe Power.