Resistex Priam Led

Dimensions and Size

The Priam Led luminaire is available in ON/OFF and HF (High Frequency) models, with different dimensions and features.

ON/OFF Model

• Diameter: Ø300 mm
• Depth: 179 mm
• Overall dimensions: 300 x 215 mm
• Features: Cable entry points.

HF Model

• Diameter: Ø300 mm
• Depth: 179 mm
• Overall dimensions: 300 x 215 mm
• Features: Cable entry points and detector mounting.

Safety and Installation Instructions

Safety Notes

• ⚠️ Never work when voltage is present on the luminaire. Ensure the power supply is disconnected before any work.
• The installation must be performed by a professional installer in compliance with the standards and regulations relating to electrical installations.
• ⚡ Risk of electrostatic discharges (ESD Norm). Handle with precautions.
• Please observe the notes and steps described in the mounting instructions.

Installation Instructions

This section details the step-by-step process for mounting the luminaire.

Maintenance Instructions

• Do not use chemicals or abrasive products to clean the fixture.
• Keep these instructions for dismantling or future maintenance.
• Additional information about RESISTEX luminaires can be consulted on the website: www.resistex-sa.com.
• RESISTEX cannot be responsible for any misuse of the product.

Mounting / Installation Steps

Follow these steps carefully for proper installation:

1. Step 1: Preparation

   Identify the luminaire base, diffuser, and mounting hardware. Ensure the power is OFF ?.

2. Step 2: Attach Mounting Bracket

   Secure the mounting bracket to the luminaire base using four (X4) screws ?.

3. Step 3: Wall Preparation

   Mark the desired mounting points on the wall. Drill holes of Ø6 mm ?️ and insert appropriate wall plugs (X4).

4. Step 4: Mount Luminaire Base

   Attach the prepared luminaire base to the wall using four (X4) screws ? into the wall plugs.

5. Step 5: Internal Wiring Preparation

   Open the luminaire base to access the internal wiring compartment.

6. Step 6: Electrical Connections

   Connect the main power supply wires to the terminal block [terminal block]. Ensure correct polarity: Live (L - Brown), Neutral (N - Blue), and Earth (E - Green/Yellow).

   Terminal Block Diagram:

   • L: Live
   • N: Neutral
   • E: Earth
7. Step 7: Secure Luminaire Base

   Ensure the luminaire base is firmly attached to the wall and wiring is correctly made.

8. Step 8: Attach Diffuser

   Carefully align and attach the diffuser to the luminaire base, securing it with four (X4) screws ?.

9. Step 9: Final Check and Power On

   Verify all connections and ensure the diffuser is securely fastened. The luminaire is now ready for operation ?.

Technical Specifications and Certifications

The Priam Led luminaire complies with various standards and features:

Company Information

RESISTEX EXPLOITATION

11 Quai de la Banquière CS 80010, 06730 Saint-André-de-la-Roche - France

Telephone: 04 93 276 276

Fax: 04 93 276 280

Email: contact@resistex-sa.com

APE Code: 2740Z

SIRET: 487 593 477 00010

SAS Capital: 649979 €

VAT Number: F.R. 73 487 593 477