Knog Blinder 600 Quick Start Guide

This guide provides essential information for setting up and using your Knog Blinder 600 front bike light.

What's in the Pack

The package typically includes:

Knog Blinder 600 Front Light
USB Type-C Charging Cable
Mounting Strap

Operation

Power Button Functions:

Long Press (2 seconds): Turn the light ON/OFF.
Quick Press: Change the light mode.
Double Press: Toggle between steady and flash modes.
Quick Press when OFF: Check battery status.

Charging

1. Lift the charging port hatch.

2. Insert the USB Type-C charging cable.

The power button will glow amber while charging. Once fully charged, it will glow green for one minute before turning off.

Battery Status

A quick press of the power button when the light is off will indicate the battery status:

Full charge: Button glows green.
75% charge: Button glows green.
50% charge: Button glows amber.
25% charge: Button glows amber.
10% charge: Button flashes red.

❗ When the power button flashes red, the light's output is reduced to 30% to preserve runtime.

Mounting

Bar Mount:

The Blinder 600 is designed to fit handlebars of various diameters (22.2 mm, 26 mm, 31.8 mm, 35 mm). Select the corresponding hole on the mount to match your handlebar diameter.

1. Firmly hold the mount in place.

2. Stretch the strap downwards.

3. Pull the strap around the handlebar and secure it onto the hook.

4. Place the light into the cradle.

5. Complete mounting by pulling up on the tab while applying downward pressure to click the light into position. Ensure the light is secure before riding.

To remove, press down on the tab and gently pull the light away from the cradle.

Under Mount (Sold Separately):

1. Place the light inside the mount in the UN-LOCKED position.

2. LOCK the under-mount.

❗ Make sure the under-mount is locked before riding. Do not ride with the under-mount unlocked.

Refer to your GoPro or computer mount instructions to complete the Blinder Under-Mount installation.

Modes & Runtimes

Mode	Lumens	Runtime
High	600	2hr
Medium	300	4hr
Low	150	8hr
Pulse	300	8hr
Strobe	150	16hr
Eco	90	120hr

	Knog Blinder 1300 Quick Start Guide: Operation, Charging, and Mounting Concise guide to the Knog Blinder 1300 bike light. Learn about operation, USB-C charging, battery status, bar and under-mount installation, and light modes with runtimes.
	Knog Blinder 1300 Quick Start Guide: Operation, Charging, and Mounting Concise guide to operating, charging, and mounting the Knog Blinder 1300 bike light. Learn about modes, runtimes, and battery status.
	Knog Blinder R-150 Quick Start Guide A quick start guide for the Knog Blinder R-150 rear bike light, detailing its operation, charging instructions, mounting procedures, and various light modes with their respective runtimes.
	Knog Blinder 600 Quick Start Guide and User Manual Concise guide to operating, charging, and mounting the Knog Blinder 600 bike light, including modes, runtimes, and warranty information.
	Knog Blinder Bike Light Quick Start Guide A concise quick start guide for the Knog Blinder series of bicycle lights, detailing initial charging, interface controls, strap fitment and interchangeability, mounting instructions, available light patterns, and warranty information.
	Knog Blinder Mini Bicycle Light Quick Start Guide A concise guide to setting up and using the Knog Blinder Mini bicycle light, covering charging, interface, fitment, mounting, and available models like Square, Skull, Cross, and Love.
	Knog Blinder 900 Quick Start Guide: Operation, Charging, and Mounting Instructions A concise and accessible guide for the Knog Blinder 900 front bike light, covering setup, operation, charging, battery status, mounting options, and light modes with runtimes.
	Knog Blinder V Bike Light Quick Start Guide and Warranty Official quick start guide and warranty information for the Knog Blinder V series bike lights, including Blinder V Traffic and Blinder V Bolt models. Details product warranty coverage.