NEEWER NF01 Floor Lamp - Assembly and User Guide

Package Contents

The package includes the following items:

• 3 x Multi-section extendable support
• 1 x Base
• 1 x Light strip
• 1 x Screwdriver
• 10 x Screws
• 1 x Power adapter
• 2 x Connectors

Product Image

The product features:

• 1. Main lamp
• 2. Floor lamp base
• 3. Power/reset button (Press once to turn on/off; press and hold for 5 seconds to restore factory settings)
• 4. Power input

Remote Control Functions:

• ① Color temperature "-"
• ② FX Mode
• ③ Brightness "+"
• ④ Color temperature "+"
• ⑤ Brightness "-"
• ⑥ Music Mode
• ⑦ Power button: Short press to turn on/off. Press and hold for 5 seconds to restore factory settings.

Note: To turn on/off or switch modes, press the button briefly. To reset, press and hold for 5 seconds.

Assembly Steps

1. Align the screw holes on the connectors with those on the extendable support, then use the screwdriver to tighten the screws.
2. Connect the power cables for the light strip and the base.
3. Insert the light strip into the slots on the support in the indicated order.
4. Connect the power adapter to the lamp base and then plug it into a power outlet.

How to Use

Using the Floor Lamp:

Connecting to the NEEWER Home App:

1. Download the NEEWER Home app from the App Store (iOS) or Google Play (Android).
2. Enable Bluetooth on your phone. Open the app, tap the "+" icon in the top right corner, and search for "NF01".
3. Tap the device icon and follow the instructions to complete the pairing.

Note: Only 2.4 GHz Wi-Fi routers with 802.11 b/g/n standards are supported. 5 GHz networks are not compatible.

Troubleshooting

1. Lamp does not turn on:
   • a. After plugging in, press and hold the power button for 5 seconds, then press it once.
   • b. Ensure the power cable connectors are securely attached.
2. Lamp does not connect to the NEEWER Home app:
   • a. Ensure Bluetooth is enabled on your phone.
   • b. Keep the connection range within 20 meters. If the device is already added but unresponsive, remove it from the app and reconnect.
   • c. Ensure your Wi-Fi router is 2.4 GHz, not 5 GHz.
   • d. Ensure you entered the correct password during Wi-Fi setup.

Safety Notes

• 1. Do not drop or strike the product to avoid damage.
• 2. Ensure all support sections are securely fastened to prevent tipping.
• 3. Do not heat, disassemble, puncture, or throw the product into fire.
• 4. Always turn off the power when not in use.
• 5. Use only the included power adapter. Using incompatible adapters may cause fire or explosions.

Specifications