Neewer NF01 Floor Lamp
Packaging Contents
The package includes the following items:
- Extension Rods: 3
- Lamp Holder: 1
- Light Strip: 1
- Screwdriver: 1
- Adapter: 1
- Screws: 10
- Connectors: 2
Product Diagram
The main lamp consists of the following parts:
- Main Light
- Floor Light
- Power/Reset Button (Single press: turn on/off; long press for 5 seconds: restore factory settings)
- Power Interface
The remote control has the following functions:
- Color Temperature "-"
- Scene Mode
- Brightness "+"
- Color Temperature "+"
- Brightness "-"
- Music Mode
- Power Button (Single press: turn on/off; long press for 5 seconds: restore factory settings)
Installation Steps
- Align the holes of the connector with the holes of the extension rod and tighten the screws with the screwdriver to secure it. Then, install the connected extension rod onto the base and tighten the screws with the screwdriver to secure it.
- Connect the light strip power to the power connector in the card slot.
- Following the diagram, press the light strip into the card slot in order.
- After installation is complete, connect the adapter to the lamp holder to use.
Usage Instructions
Connecting Your Lamp to the Neewer Home App
- Download the Neewer Home application from the App Store (iOS devices) or Google Play (Android devices).
- Turn on your phone's Bluetooth. Open the app, tap the "+" icon in the top right corner, search for "NF01". Tap the device icon and follow the on-screen prompts to complete the addition.
- Only supports 2.4GHz and 802.11 b/g/n Wi-Fi routers. 5GHz is not supported.
Troubleshooting
- Lamp does not light up:
- After powering on the device, long press the power button for 5 seconds to reset, then single press the power button.
- Check if the lamp terminals are in poor contact.
- Cannot connect to the Neewer Home application:
- Check if Bluetooth is enabled on your phone.
- Connection distance recommended < 20 meters. If there is an anomaly with an already added device, please delete the connected device from the app and re-add it.
- Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
- Ensure you have entered the correct Wi-Fi password during the Wi-Fi setup process.
Precautions
- Do not drop or hit the product to avoid damage.
- When using the stand, please lock it tightly to prevent the product from falling.
- Do not heat, disassemble, puncture, destroy the device, or throw it into fire.
- Turn off the power when not in use.
- Only use the adapter supplied with the device. Using an incompatible adapter may cause fire or explosion.
Product Specifications
| Model | NF01 |
|---|---|
| Input | DC 24V/1.5A |
| Color | RGBW |
| Operating Temperature | -10° to 40°C / 14° to 104°F |
