NEEWER NF01 Floor Lamp - Assembly and Usage Guide

Package Contents

The package includes the following items:

• Extension Rods (x3)
• Base (x1)
• Light Strip (x1)
• Power Adapter (x1)
• Screwdriver (x1)
• Screws (x10)
• Connectors (x2)

Product Introduction

The floor lamp consists of the following main components:

• Main Lamp
• Floor Lamp
• Power/Reset Button: Press once for power on/off. Press and hold for 5 seconds to reset to factory settings.
• Power Input

Remote Control Functions

The remote control has the following functions:

• ① Color Temperature "-"
• ② FX Mode
• ③ Brightness "+"
• ④ Color Temperature "+"
• ⑤ Brightness "-"
• ⑥ Music Mode
• ⑦ Power Button: Single click to turn the power on/off; press and hold for 5 seconds to reset to factory settings.

Assembly Instructions

1. Align the screw holes of the connector with the screw holes of the extension rod and tighten the screws with the screwdriver.
2. Connect the power cord of the light strip to the base.
3. Insert the light strip into the slot according to the installation steps.
4. Afterward, plug the power adapter into the lamp base and connect it to the power outlet.

Usage Instructions

Connecting to the NEEWER Home App

1. Download the NEEWER Home app from the App Store (iOS) or Google Play (Android).
2. Turn on your smartphone's Bluetooth. Open the app, tap the "+" icon in the upper right corner, and search for "NF01".
3. Tap the device icon and follow the on-screen instructions to complete pairing.
4. Supports 2.4GHz and 802.11 b/g/n Wi-Fi routers only. 5GHz is not supported.

Troubleshooting

• Lamp does not turn on:
  a. After the device powers on, press and hold the power button for 5 seconds to reset, then click the power button again.
  b. Check if the lamp terminal contacts are poor.
• Cannot connect to the Neewer Home app:
  a. Ensure Bluetooth is turned on on your mobile phone.
  b. The recommended connection distance is within 20 meters. If there are issues with the added device, remove the device from the program and reconnect.
  c. Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
  d. Ensure you entered the correct Wi-Fi password during Wi-Fi setup.

Precautions

1. Do not drop the product on the ground, hit it with hard objects, or subject it to strong impact.
2. When using the stand, ensure it is securely locked to prevent falling.
3. Do not heat, disassemble, puncture, crush, or dispose of the device in fire.
4. Turn off the product when not in use.
5. Use only the included adapter. Using an incompatible adapter may cause fire or explosion.

Specifications