Safety Notice
WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Smart Pet Water Fountain and other property. Read all the safety notices below before using the Smart Pet Water Fountain.
- Avoid high humidity or extreme temperatures.
- Avoid long exposure to direct sunlight or strong ultraviolet light.
- Do not drop or expose the unit to intense vibration.
- Do not disassemble or try to repair the unit yourself.
- Do not expose the unit or its accessories to flammable liquids, gases or other explosives.
Technical Specifications
| Hopper Capacity | 2 L |
| Pump Head | 0.4m-1.5m |
| Pump Flow | 220l/h |
| Power Adapter | DC 5V 1A |
| Material | ABS Plastic |
| Dimension | 190 x 190 x 165 mm |
| N. W. | 0.8 kg |
| Color | White |
Welcome
The Pet water fountain allows you to feed your pet automatically and help your pet get in the habit of drinking water on his own, which will make your pet healthier. This guide will provide you with an overview of the product and help you get through the initial setup.
Features:
- Dual feeding mode - Smart & Normal
- Double filtration
- Silent pump
- Divided-flow body
- Water shortage alarm
- Water quality monitoring reminder
- Lighting reminder
In the box
- Pet Feeder x 1
- Filter Cotton x 2
- Micro USB cable x 1
- Quick Guide x 1
Please check the condition and the accessories of water fountain after you open the box.
Get to know your device
The device consists of several key components:
- Water level window: Allows visual checking of the water level.
- Flower: A decorative element, likely part of the water spout.
- Drinking tray: The area where water collects for the pet to drink from.
- Cotton filter: Located within the tray's filter box slot to purify water.
- Tray: Supports the drinking tray and houses the filter.
- Water bucket: The main reservoir for holding water.
- Base: The foundation of the unit, containing the pump, mode switch, and power port.
- Mode switch: A control on the base to select between Normal and Smart modes.
- Trunking: A channel or groove for managing the power cable.
- Micro USB Port: The input for the power cable.
- Non-slip mat: Located on the bottom of the base to prevent sliding.
Device Controls and Ports
The base of the device features:
- Mode switch: Used to select between 'Normal Mode' (indicated by a blue light) and 'Smart Mode' (indicated by a purple light).
- Micro USB Port: The power input for the device.
- Trunking: A channel to guide and secure the power cable.
- Non-slip mat: Located on the underside of the base for stability.
Get Started
Follow these steps to set up your Smart Pet Water Fountain:
- Take out the water fountain and internal accessories from the packaging.
- Rinse the water bucket and the outlet pipe with clean water.
- Insert the outlet pipe firmly into the outlet hole of the silent water pump.
- Add water to the water bucket, ensuring it does not exceed the highest water level mark.
- Install the tray onto the base.
- Rinse the filter box with clean water and place it into the tray's filter box slot.
- Install the drinking tray onto the filter box.
- Adjust the mode switch on the base to select the desired water outlet mode (Normal or Smart).
- Insert the USB cable into the Micro USB socket on the base and press the cable into the trunking groove for management. Place the entire base on a stable surface.
- Connect the base to the power supply. Place the water bucket securely on the base. The water fountain indicator light will illuminate, and the device will begin to operate.
Figure 1 Description: This figure likely illustrates the individual components of the water fountain laid out separately before assembly, showing the water bucket, tray, filter, pump, and power cable.
Figure 2 Description: This figure likely shows the assembled water fountain with the power cable correctly routed through the trunking and plugged into the Micro USB port on the base.
Indicator Status
The indicator light on the device provides information about its current status:
| Indicator Status | Device Status |
|---|---|
| Blue light is always on. | Water comes out continuously. |
| Purple light is always on. | Water comes out intermittently (Works for 10 seconds, pauses for 5 seconds). |
| Red light is flashing. | Water shortage alarm. |
| Red light is always on. | Water quality monitoring alarm. |
