SPF2000-W-TY Smart Pet Feeder
Quick Start Guide
Preface
APP Download
1. Scan the QR Code behind the Pet Feeder with your smartphone.
2. Search 'Smartlife' APP from App store.
Quick start by the following steps:
- Make sure the Wi-Fi indicator is rapidly blinking. If not, please reset the network configuration.
- Open your App, then click the '+' button at the top right corner of the App to add devices.
- Select 'Pet Feeder' to add manually the Pet Feeder in "Small Home Appliances" list.
Visual representation of the app interface showing categories like Lighting, Drying Rack, Electric Blanket, Warming Table, Large Home Appliances, Small Home Appliances, Kitchen Appliances, Security & Sensors, Exercise & Health, Video Surveillance, Gateway and others. Under 'Small Home Appliances', 'Pet' category is shown with icons for Pet Fountain, Pet Treat Feeder, Pet Ball Thrower, Pet House, Cat Toilet, and Pet Feeder. The 'Pet Feeder' option is highlighted with a blue arrow.
Safety Notice
WARNING: Failure to follow these safety notices could result in fire, electric shock, other injuries, or damage to the Smart Pet Feeder and other property. Read all the safety notices below before using the Smart Pet Feeder.
- Avoid high humidity or extreme temperatures.
- Avoid long exposure to direct sunlight or strong ultraviolet light.
- Do not drop or expose the unit to intense vibration.
- Do not disassemble or try to repair the unit yourself.
- Do not expose the unit or its accessories to flammable liquids, gases or other explosives.
Technical Specifications
| Hopper Capacity | 7.5L |
| Microphone | 10 meters, -30dBV/Pa |
| Speaker | 8 Ohm 1w |
| Power | DC power cord Backup batteries: 3 x D cell |
| Dimension | 230 x 230 x 500 mm |
| N. W. | 3.76 kg |
| Power Consumption | 0.8 W |
| Color | White |
In the box
Pet Feeder x 1; Power Adapter x 1; Quick Guide x 1; Cord Hose Protector x 1; Stand x 1
Please check the condition and the accessories of pet feeder after you open the box.
1 Welcome
The Smart Pet Feeder allows you to feed remotely or apply schedules for automatic feeding. With the voice recording function, it will loop your voice 3 times when the food is delivered.
This guide will provide you with an overview of the product and help you get through the initial setup.
Features:
- Wi-Fi Remote control - Tuya APP smartphone programmable
- Voice record & playback
- Automatic & manual feeding - built buttons for manual control
- Accurate feeding - per day
- 7.5L food capacity - 7.5L large capacity
- Dual power protective - Battery backup, continuous operation during power failure
Tips:
Recommend food size between 5 mm – 15 mm.
Two diagrams illustrating recommended food sizes. The left diagram shows a food particle with dimensions labeled '5-15mm'. The right diagram shows a round food particle with dimensions labeled '5-15mm'.
2 Get to know your device
Diagram of the Smart Pet Feeder with labels pointing to different parts: Cover, Buttons (Open the cover), Microphone, Wi-Fi indicator, Fault indicator lamp, Food outlet, Bowl.
Wi-Fi indicator
The Wi-Fi status gives the following information:
| Wi-Fi Status | What it means |
|---|---|
| Flashing | Pet Feeder has not joined the Internet. |
| Steady light | Pet Feeder has joined the Internet. |
Fault indicator lamp
The Fault indicator flashes when one of the following happens:
- Network situation: the Pet Feeder cannot connect to the cloud
- Feeding situation: there is no food come out, or food doesn't come out correctly.
Tips:
When entering the recording state, the fault indicator will always be on, and then exit the recording state to restore the fault indication.
Device Components
Diagram showing the rear/side of the Smart Pet Feeder with labels: Battery box, Power jack, Speaker, Power switch.
Battery box
3 x D-size batteries. Please pay attention to the polarity. Please note that the battery charging is for backup purpose only. If you wish to control the pet feeder remotely, power supply is needed.
Speaker
The speaker allows for sound playback.
Power switch
A physical switch to turn the device on or off.
Power jack
Use the supplied power adapter to connect to a power source.
Button Introduction:
Voice record
Press once to enter/exit the recording. The longest recording time is 10S.
Play back
Press once to play/stop playing the voice record.
Feed / Reset network configuration
Press once to manually feed once in 1 portion. Hold the button for 6 seconds, The WIFI indicator rapidly blinking to reset the network information.
Diagram showing the buttons REC, PLAY, and OK, with labels indicating their functions. It also shows a QR code for app download and a label for 'Feed / Reset network configuration'.
3 Get started
To get started, you will need:
- A Wi-Fi network.
- A mobile phone with a mobile APP installed.
Then follow the steps below:
- Power on the Smart Pet Feeder.
- Make sure the Wi-Fi indicator lamp is rapidly blinking. If not, please reset the network configuration.
3.1 Add devices
- Open your App
- Login with an existing account. If you are a new user, you need to create an account at first.
- Please click the '+' button at the top right corner of the App to add devices.
- Select 'Pet Feeder' to add manually the Pet Feeder in "Small Home Appliances" list.
Visual representation of the app interface showing categories like Lighting, Drying Rack, Electric Blanket, Warming Table, Large Home Appliances, Small Home Appliances, Kitchen Appliances, Security & Sensors, Exercise & Health, Video Surveillance, Gateway and others. Under 'Small Home Appliances', 'Pet' category is shown with icons for Pet Fountain, Pet Treat Feeder, Pet Ball Thrower, Pet House, Cat Toilet, and Pet Feeder. The 'Pet Feeder' option is highlighted with a blue arrow.
Steps for adding device:
- Confirm your Wi-Fi indicator is rapidly blinking. Then enter your home Wi-Fi account and password (Only support 2.4Ghz Wi-Fi).
- App screen showing Wi-Fi connection setup. It displays options for 2.4GHz and 5GHz networks, fields for 'Wi-Fi Name' and 'Password', and a 'Next' button. An arrow points to the Wi-Fi Name field.
- Place the router, mobile phone, and Pet Feeder as close as possible.
- Waiting for connection. A progress indicator shows '3%' and steps like 'Scan devices', 'Register on Cloud', 'Initialize the device'.
- After the device has been added, you can use [edit icon] to rename the device.
3.2 App Overview
Diagram illustrating the app's 'Home' screen. Labels point to 'Home management', 'Location Information', 'Device List', 'Add Device', 'Voice Control', and 'Room Management'. The main area shows 'All Devices' with 'OWON-WIFII pet feed' listed. Navigation icons for Home, Smart, and Me are at the bottom.
Home:
- Device list: You can check the added device, tap one to enter the control board.
- Location information: Information about your local weather conditions, outdoor temperature, PM.
- Home management: Add or delete home and manage home names, rooms, locations, and members.
- Room management: Manage rooms. You can create rooms and assign devices to each room.
- Voice control: (Temporarily not available on App)
Smart:
Create smart scenes and add automatic functions (Temporarily not available).
Me:
App settings and FAQ about the app.
Control board:
Diagram showing the control board for the Pet Feeder. It displays 'Total portion', 'Automatic feed', 'Feeding records', and 'Manually feed'. An option to 'Add schedule for automatic feed' is shown with a '+' icon. The screen indicates '21 portions' and 'Not feeding: 0 portions'.
Automatic feed
Tap to edit the schedule for the automatic feed. Timer tolerance may be about 30 seconds.
Manually feed
Tap to feed manually. The maximum number of portions is 20 at a time.
4 FAQ
1. How do I install the stand
Align the stand with the hole at the bottom. Gently push the stand into the hole at the bottom.
Diagram showing the Smart Pet Feeder with its stand components. The stand is shown in two parts, with dotted lines indicating how they align and attach to the bottom of the feeder.
Product Information
Product Model Number: SPF2000-W-TY
Internal Identifier: 7007020100101
