Ecler WP22DN
DANTE™/AES67 Digital Audio Wall Panel Interface
Product Overview
The WP22DN is a wall panel interface with DANTE™/AES67 digital audio transport protocols compatibility. It features 2 audio MIC/LINE Combo connector inputs on its frontal panel and 2 DANTE™/AES67 conversion channels, either directly or by the sum of the analogue inputs channels (stereo to mono conversion). It also features 2 analogue outputs with duplicated connectors in XLR format for the front panel and Euroblock on the rear panel, both linked to 2 DANTE™/AES67 channels coming from the local network. It supports PoE supply or local power supply (optional).
Key Features
- DANTE™/AES67 compatible audio interface wall panel
- 2 balanced analog inputs, MIC/LINE level (4 gain taps selector), with Combo connector
- Conversion of 2 analog channels to 2 DANTE™/AES67 channels, directly taking the 2 input channels or combining them (IN1 + IN2 mix)
- 2 balanced analogue outputs, with XLR connector on the front panel and Euroblock connector on the rear panel. The outputs come from the conversion of the 2 DANTE™/AES67 channels received in the unit
- Ethernet communication interface, RJ45 connector
- PoE power or local power supply (optional)
- Phantom Power available for the analogue inputs, 48VDC, 5 mA max.
- Double gang size, compatible with Ecler double gang surface mount installation box (WPa2SMBOX, supplied by default with each unit) and with Ecler double gang flush mount installation box (WPa2FMBOX, optional)
- Double set of front panel plates: one with access to the inputs' gain selector, and the other one with this access unreachable
Applications
- Commercial
- Hospitality
- Education
- Corporate
- Sports and wellness
Accessories and Compatible Devices
- MIMO4040DN
- DN44BOB
- eCA120DN
- eCA120HZDN
- WPa2FMBOX
Technical Specifications
Analogue inputs
- Input channels: 2 x analog, balanced
- Connectors: 2 x XLRF + jack Combo
- Max Input Level: +10dBV / +12dBu @ 0dB Gain
- Gain settings: 0 / 10 / 20 / 35dB
- Input Impedance: Balanced > 4kΩ
- CMRR 20Hz-20kHz: 65dB typ.
- THD+Noise @ 1kHz, 0dBV Gain: <0.004%
- Phantom power: +48VDC, 5mA max. ON / OFF by DIP SWITCH
Analogue outputs
- Output channels: 2 analog, balanced, line level
- Connectors: 2 XLR M External, 2 Euroblock Internal
- Max Output Level: +10dBV / +12dBu @ 0dB Gain
- Frequency response (-3dB): 5Hz to 24kHz
- Flatness: better than ±0.1dB
- THD+Noise @ 1kHz: <0.004%
- Output Noise floor FFT (20Hz - 20kHz): better than 110dB
AD/DA converters
- Resolution: 24bit AKM
- Dynamic Range: ADC 110dB, DAC 115dB
- Latency (fs = 48 kHz): ADC 0,81ms, DAC 0,56ms
DANTE™/AES67 / AES67 audio interface
- DANTE™/AES67 / AES67 Network Tx / Rx channels: 2/2 (2/2 flows)
- Latency: 1 / 2 / 5 ms (selectable)
- Connector: 1 x RJ45
- Cable length between devices: 100m CAT5e/CAT6
DC supply
- Poe Power supply: PoE: class 0 802.3af Poe PD compliant
- External Power supply: 12 - 24VDC
- Power consumption: from PoE 60mA / 2.8W, from Ext power 2.7W
Accessories included
- Mounting systems: Surface mount installation box WPa2SMBOX
Mechanical
- Finished colour: White (RAL 9016)
- Dimensions: 170x85x40mm / 6.7" x 3.3" x 1.6"
- Weight: 0,4 kg. / 0.9 lb.
Mechanical Diagrams
Ecler Output 1
Diagram shows an XLR connector labeled 'OUTPUT 1' and a Dante connector. Below the connectors are gain controls with settings: 10 dB, 0 dB, -20 dB, -35 dB. Labeled as 'GAIN INPUT 1'.
Ecler WP22DN Output 2 and Power
Diagram shows an XLR connector labeled 'OUTPUT 2' and a Dante connector labeled 'POWER'. Below the connectors are gain controls with settings: 10 dB, 0 dB, -20 dB, -35 dB. Labeled as 'GAIN INPUT 2'.
