Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Underseat Storage | 1 pc |
| B | Mini Underseat Storage | 1 pc |
| C | Nylon Strap with Buckle | 2 pcs |
| D | M10 Nuts | 2 pcs |
| E | Metal Strap Clip | 2 pcs |
Installation Steps
Flip up rear seats.
Fig 1: Illustration showing rear seats flipped up.
Run the nylon straps through metal clips.
Fig 2: Close-up view of nylon straps being threaded through metal clips.
Apply metal clips on factory thread beside rear seat hinge, snag and tighten 1/2” nuts.
Fig 3: Shows metal clips attached to the vehicle's factory thread near the seat hinge, with nuts being tightened.
Place OEDRO® underseat storage on floor, slot side face to rear. Run the nylon straps through the slot.
Fig 4: Illustration of the underseat storage box positioned on the floor, with straps routed through the designated slot.
Reference Fig 4 to anchor the nylon straps. Tighten and adjust strap to fix storage on floor.
Fig 5: Shows the nylon straps anchored and tightened to secure the storage unit to the vehicle floor.
Place mini storage case into underseat storage for your needs.
Fig 6: Demonstrates placing the smaller mini storage case inside the main underseat storage unit.
Flip down rear seat.
No specific figure shown for this step; it implies returning the seat to its normal position.
