Safety Warnings
WARNING!
Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
The following warnings are provided in multiple languages:
- English: WARNING!
- German: ACHTUNG!
- French: ATTENTION!
- Dutch: WAARSCHUWING!
- Danish: ADVARSEL!
- Icelandic: VARÚÐ!
- Norwegian: ADVARSEL!
- Swedish: VARNING!
- Finnish: VAROITUS!
- Czech: UPOZORNĚNÍ!
- Spanish: ¡ADVERTENCIA!
- Italian: AVVERTENZA!
- Hungarian: FIGYELMEZTETÉS!
- Polish: OSTRZEŻENIE!
- Estonian: HOIATUS!
- Latvian: BRĪDINĀJUMS!
- Lithuanian: ĮSPĖJIMAS!
- Portuguese: AVISO!
- Romanian: AVERTISMENT!
- Slovak: UPOZORNENIE!
- Bulgarian: ВНИМАНИЕ!
- Croatian: UPOZORENJE!
- Greek: ΠΡΟΕΙΔΟΠΟΙΗΣΗ!
- Russian: ВНИМАНИЕ!
- Ukrainian: УВАГА!
- Serbian: UPOZORENJE!
- Slovenian: POZOR!
- Turkish: UYARI!
- Chinese (Simplified): 警告!
- Chinese (Traditional): 警告!
- Korean: 주의!
- Japanese: 警告!
- Indonesian: PERINGATAN!
- Malay: AMARAN!
- Arabic: تحذير!
- Thai: คำเตือน!
- Vietnamese: CẢNH BÁO!
Tools and Parts
The following tools may be needed for assembly:
- Screwdriver (Phillips head)
- Screwdriver (Flat head)
- Pencil
- Spirit Level
The following parts are included:
- 4x Screw (105103)
- 12x Screw (115461)
- 16x Screw (190473)
- 1x Screw (100404)
- 2x Dowel (151059)
- 4x Screw (195313)
- 2x Bracket (10002580)
- 2x Bracket (10002566)
- 8x Bracket (10003241)
- 4x Washer (10003245)
- 4x Screw (100408)
- 4x Screw (108031)
- 2x Side Panel Connector (10002394)
- 1x Wall Attachment Plate (107967)
- 2x Door Hinge (10002420)
- 2x Door Hinge (10002423)
- 4x Shelf Support (10003221)
- 4x Shelf Support (10003222)
- 2x Door Handle (10002566)
- 2x Door Handle (10002580)
- 1x Allen Key (130445)
- 2x Shelf (10003221)
- 2x Shelf (10003222)
- 1x Door (10002394)
- 1x Door (10002394)
- 1x Lock (10002394)
Assembly Steps
Step 1: Attach the leg brackets to the base of the cabinet using screws (195313).
Step 2: Assemble the frame by connecting the side panels and crossbars using the provided screws and dowels.
Step 3: Attach the base frame to the legs using screws (115461).
Step 4: Place the bottom panel onto the assembled frame.
Step 5: Attach the vertical support poles to the base frame using screws (105103).
Step 6: Continue attaching the vertical support poles.
Step 7: Place the middle shelf onto the support poles.
Step 8: Attach the wall mounting bracket to the back of the cabinet using screws (100404, 105057) and dowels (10003221, 10003222).
Step 9: Secure the frame and prepare for the glass panels. Rotate the unit if necessary.
Step 10: Carefully insert the first glass panel into the grooves of the frame.
Step 11: Insert the second glass panel.
Step 12: Insert the third glass panel.
Step 13: Place the top panel onto the cabinet frame and secure it with screws (10003241, 10003245, 100408, 108031).
Step 14: Attach the door hinges to the doors using screws (100404, 105057) and brackets (10003241, 10003245, 100408, 108031).
Step 15: Attach the door handles to the doors using screws (115461, 190473) and brackets (130445).
Step 16: Attach the doors to the cabinet frame using the hinges and screws (100404, 105057).
Step 17: Secure the glass panels with washers (10002420, 10002423) and screws (100408, 108031).
Step 18: Attach the door hinges to the cabinet frame using screws (195311, 195795).
Step 19: Insert the shelf supports into the cabinet.
Step 20: Place the shelves onto the shelf supports.
Step 21: Secure the shelves using the provided hardware.
Step 22: Attach the door handles to the doors using screws (10002580, 10002566).
Step 23: Insert the lock into the door and secure it with the key.
Step 24: Adjust the leveling feet at the bottom of the cabinet to ensure it is stable.
Step 25: Ensure the cabinet is properly secured to the wall using the provided wall attachment hardware.
Step 26: Attach the decorative strip to the top of the cabinet.
Step 27: Secure the decorative strip with screws.
Step 28: Attach the door catches.
Step 29: Insert the shelves into the cabinet.
Step 30: Final check of all connections and stability.
Step 31: Ensure doors are aligned and functioning correctly.
Step 32: Lock the doors.
Wall Mounting
To prevent tip-over accidents, it is crucial to secure the MILSBO cabinet to the wall using the provided wall attachment device. Ensure you use screws and plugs suitable for your specific wall type. If unsure, consult a professional.
