LÅDMAKARE Assembly Instructions
Important Information
⚠️ WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.
Fastening devices for the wall are not included since different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.
Read carefully.
Follow each step of the instructions carefully.
Keep this information for further reference.
Hebrew:
מידע חשוב
קראו בתשומת לב
בצעו כל שלב של ההוראות בזהירות
שמרו על עלון מידע זה לעיון עתידי
אזהרה: נפילת הרהיט עלולה לגרום לפגיעה גופנית קשה או קטלנית. על מנת למנוע את נפילת הרהיט, יש לקבע אותו לקיר עם אבזרי הקיבוע המצורפים.
הברגים נמכרים בנפרד מפני שקירות מחומרים שונים מצריכים סוגי ברגים שונים. השתמשו בברגים המתאימים לקירות בביתכם. לקבלת מידע נוסף על הברגים המתאימים, אנא פנו לאיש מקצוע ו/או לחנות מתמחה.
Parts List
| Description | Quantity | Part Number |
|---|---|---|
| Long Bolt | 4x | 10043592 |
| Wooden Dowel | 4x | 101449 |
| Metal Bracket | 4x | 151931 |
| Screw | 8x | 10097004 |
| Washer | 4x | 151931 |
| Wrench | 1x | 10046118 |
| Metal Bracket | 4x | 114664 |
| Metal Bracket | 4x | 126916 |
Preparation and Tools
Tools required:
- Screwdriver (❌)
- Hammer (?)
- Spirit Level (?)
- Power Drill ( ड्रिल)
- Ladder (?)
Handling materials: Two people are recommended for carrying and assembling the furniture parts.
Assembly surface: It is recommended to assemble on a soft surface like a rug to protect the furniture and floor.
For video instructions and more details, scan the QR code or visit: https://m.qr.ikea.com/m/ladmakare-f3U5Y6 ▶️
Step 1: Prepare Side Panels
Insert wooden dowels (101449) into the pre-drilled holes on the edges of the side panels using a hammer.
Step 2: Attach Base/Top Panels
Attach the base or top panel to the side panels using bolts (10043592). Ensure the bolt head is flush or slightly recessed, with at least 5mm clearance.
Step 3: Assemble Main Frame
Connect the main frame components. This step involves attaching parts using screws (10111468) and connectors (10111561). The diagram shows multiple connection points:
- 20x screws (10111468) and 20x connectors (10111561) for primary frame connections.
- 4x screws (10111468) and 4x connectors (10111561) for secondary frame connections.
- 2x screws (10111468) and 2x connectors (10111561) for further frame connections.
Follow the visual guides for precise placement of these components.
Step 4: Reinforce Frame
Further reinforce the assembled frame. This step uses screws (10111468) and connectors (10111561) at multiple points:
- 16x screws (10111468) and 16x connectors (10111561).
- 18x screws (10111468) and 18x connectors (10111561).
Additionally, attach metal brackets (151931 and 158701) to the frame. Quantity: 4x of each bracket type.
Step 5: Attach Wall Mounting Brackets
Attach the wall mounting brackets (126916) to the side of the unit. Use one bracket (126916) per side, secured with a screw. Ensure correct placement based on the indicated measurements (6 mm, 12 mm, 18 mm).
Note: The diagram shows a circular piece with a hole (likely the bracket) and another with a cross, indicating a correct and incorrect orientation or usage.
Step 6: Insert Shelves
Place the shelves into the assembled unit. The diagram indicates the following quantities for shelf placement:
- 3x shelves
- 2x shelves
- 2x shelves
- 1x shelf
- 1x shelf
Step 7: Attach Top Panel
Secure the top panel to the unit using the provided wrench (10046118). Quantity: 4x.
Step 8: Attach Additional Brackets
Attach additional brackets (126916) to the unit, likely for stability or drawer runners. Quantity: 3x.
The diagram shows a circular piece with a hole and another with a cross, indicating correct usage.
Measurements for placement are provided: 6 mm (1/4"), 12 mm (1/2"), 18 mm (6/8").
Step 9: Attach Covers/Handles
Attach covers or handles (10097004) to the unit. Quantity: 4x.
Step 10: Final Placement and Options
Position the assembled LÅDMAKARE unit in its desired location. A ladder is shown, suggesting it might be used for reaching higher shelves or for wall mounting.
Final Assembly Options:
The unit can be completed with drawers or doors. Diagrams show the attachment of a drawer front and a drawer side, using parts like 118331 and 10117078.
