LÅDMAKARE Assembly Instructions

Important Safety Information

Read carefully

Follow each step of the instruction carefully.

Keep this information for further reference.

WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this furniture from tipping over, it must be permanently fixed to the wall with the included wall attachment devices.

Fastening devices for the wall are not included since different wall materials require different types of fastening devices. Use fastening devices suitable for the walls in your home. For advice on suitable fastening devices, contact your local specialized dealer.

Tools Required

• Screwdriver ?
• Hammer ?
• Spirit Level ?
• Drill ड्रिल
• Ladder ?

Parts List

Note: Part numbers may be reused for different components or quantities across various steps. The list above reflects parts identified in the diagrams.

Assembly Steps

General Guidance: Assembly is recommended for two people. Handle all components with care to avoid damage.

Step 1: Initial Panel Attachment

Attach a panel to another component using 2x dowel/cam lock pins (101449). Insert the pins into the pre-drilled holes on one panel, then align with the corresponding holes on the other panel.

Step 2: Securing Panels

Attach a panel using 2x bolts (10043592). Ensure a gap of at least 5mm is maintained between components during this step.

Step 3: Assembling Main Structure

Attach a long panel to the main structure. This involves using 10x screws (10111468) and 10x cam locks (10111561). Insert screws into designated holes and secure with cam locks.

Step 4: Attaching Additional Panels

Attach another long panel. This step uses 10x screws (10111468) and 10x cam locks (10111561).

Step 5: Securing Brackets

Attach brackets to a panel. Use 2x screws (10111468) and 2x cam locks (10111561) for this attachment.

Step 6: Further Panel Assembly

Attach a long panel to the structure. This step requires 8x screws (10111561) and 8x cam locks (10111468).

Step 7: Attaching Brackets for Wall Mounting

Attach brackets (2x 151931 and 2x 158701) to the unit as part of the wall anchoring preparation.

Step 8: Tightening Fasteners

Use a tool to tighten 2x fasteners (Part No. 10046118).

Step 9: Wall Anchoring Preparation

Attach wall brackets (3x 126916) to the unit. Ensure the unit is positioned correctly against the wall.

(Diagrams show different bracket types and placements for wall anchoring, including specific dimensions like 6mm, 12mm, 18mm for different wall types or bracket configurations.)

Step 10: Attaching Cover Panel

Attach a cover panel (10097004) using 4x brackets.

Step 11: Inserting Shelves

Carefully insert the shelves into the assembled unit.

Step 12: Attaching Side Panels

Attach the final side panels to the unit. Secure them using the provided fasteners.

Step 13: Final Fastener Tightening

Use a tool to tighten 2x fasteners (Part No. 10046118).

Step 14: Wall Anchoring (Continued)

Secure the unit to the wall by attaching wall brackets (2x 126916) to the unit and then to the wall using appropriate wall fasteners (not included).

Step 15: Wall Anchoring (Final)

Complete the wall anchoring process. Attach wall brackets (2x 126916 and 2x 114664) to the unit. Ensure correct alignment and use appropriate wall fasteners (not included). Pay attention to the specified dimensions (6mm, 12mm, 18mm) for bracket placement or wall type compatibility.

Step 16: Final Shelf Placement

Insert any remaining shelves into the unit.

Online Resources:

For more information or assembly videos, visit: https://m.qr.ikea.com/m/ladmakare-E3J4r9 ▶️