Product Overview
This document provides assembly instructions for the Seville Classics UltraHD® Cabinet Stacker, Model No. WEB347 and WEB641. The cabinet features UltraGuard® fingerprint-resistant surfaces and increased durability. It is designed to mount on top of Seville Classics UltraHD Mega Cabinets (Model No. UHD16238, UHD20148). Assembly is recommended for two people ???. A magnetic screwdriver ? is included for convenience. If a power screwdriver is used, keep it on a low torque setting.
Note: Assemble on top of cardboard to reduce the chance of scratches or damage during assembly.
Parts List
Please check the parts carefully according to the parts list. If you are missing any parts, please call Seville Classics customer service.
- (#1) Left Panel x 1 PC
- (#2) Right Panel x 1 PC
- (#3) Top Panel x 1 PC
- (#4) Bottom Panel x 1 PC
- (#6) Left Door x 1 PC
- (#7) Right Door x 1 PC
- (#8-A) Back Panel x 1 PC
- (#14) Corner Protection A x 2 PCS
- (#15) Corner Protection B x 2 PCS
- (#17-A) Left Front Bottom Corner Protection x 1 PC
- (#18-A) Right Front Bottom Corner Protection x 1 PC
- (#19-A) Right Back Bottom Corner Protection x 1 PC
- (#20-A) Left Back Bottom Corner Protection x 1 PC
- (#21) Screw Driver x 1 PC ?
- (#22) KEY x 2 PCS ?
- (#23) Magnet x 2 PCS
- (#27) WASHER (M4) x 2 PCS
- (#27-B) WASHER (M8) x 2 PCS
- (#41) Screw F (M4 x 8L) x 50 PCS
- (#42) Screw G (M4 x 30L) x 8 PCS
- (#54) Screw N (M4 x 10L) x 26 PCS
- (#55) Screw M (M6 x 50L) x 2 PCS
- (#55-A) Wall Anchor x 2 PCS
- (#60) Mounting Strap x 2 PCS
- (#61) Screw O (M4 x 12L) x 2 PCS
Assembly Instructions
*NOTE: We recommend using TWO people to assemble the cabinet* ???
TIP: A magnetic screwdriver ? is included for your convenience. If a power screwdriver is used, keep on a low torque setting.
Note: Assemble on top of cardboard to reduce chance of scratches or damage during assembly.
Step 1: Install Right Panel (#2) to the Top Panel (#3)
Place the Right Panel (#2) on the ground vertically. Make sure the front of the panel faces downward. Place the Top Panel (#3) next to the Right Panel (#2). Line up the screw holes, use 4 pcs of Screw F (#41) to tighten.
Diagram Description: An illustration shows the Right Panel (#2) and Top Panel (#3) being joined. Arrows indicate Screw F (#41) being inserted into pre-drilled holes to secure the panels.
Step 2: Install Left Panel (#1)
Place the Top Panel (#3) and Left Panel (#1) vertically. Line up the screw holes, use 4 pcs of Screw F (#41) to tighten.
Diagram Description: An illustration shows the Left Panel (#1) and Top Panel (#3) being joined. Arrows indicate Screw F (#41) being inserted into pre-drilled holes to secure the panels.
Step 3: Install Bottom Panel (#4)
Attach the Bottom Panel (#4) to the Left and Right Side Panels (#1 and #2). Make sure the front of the panel faces downward. Use 8 pcs Screws G (#42) to assemble the panels.
Diagram Description: An illustration shows the Bottom Panel (#4) being attached to the assembled Left (#1) and Right (#2) panels. Arrows indicate Screws G (#42) being inserted along the edges.
Step 4: Install Back Panel (#8-A)
Place the Back Panel (#8-A) onto both Left and Right Side Panels (#1 and #2) and Top and Bottom Panel (#3 and #4). Use 12 pcs of Screw F (#41) to tighten.
Diagram Description: An illustration shows the Back Panel (#8-A) being attached to the main cabinet structure. Arrows indicate Screw F (#41) being inserted along the edges of the back panel to secure it.
Step 5: Install Magnet (#23)
Use 4 pcs of Screw F (#41) to install the Magnet (#23) on the Top Panel (#3) and the Bottom Panel (#4).
Diagram Description: A close-up illustration shows the Magnet (#23) being attached to the underside of the Top Panel (#3) and the top side of the Bottom Panel (#4) using Screw F (#41).
Step 6: Install Left Door (#6)
Attach the Left Door (#6) to the Left Panel (#1). Use 3 pcs Screw F (#41) to tighten the Door Panel.
Diagram Description: An illustration shows the Left Door (#6) being attached to the Left Panel (#1) via hinges. Arrows indicate Screw F (#41) being used to secure the hinges.
Note: The screw holes on the door hinge have tolerance, enabling the door to be adjusted and centered in the door frame.
Step 7: Install Right Door (#7)
Attach the Right Door (#7) to the Right Panel (#2). Use 3 pcs Screw F (#41) to tighten the Door Panel.
Diagram Description: An illustration shows the Right Door (#7) being attached to the Right Panel (#2) via hinges. Arrows indicate Screw F (#41) being used to secure the hinges.
Note: The screw holes on the door hinge have tolerance, enabling the door to be adjusted and centered in the door frame.
Step 8: Install the Corner Protection A&B (#14 & #15)
Use 20 pcs of Screws F (#41) to install the Corner Protection A (#14) and B (#15) onto the top of the cabinet.
Diagram Description: Close-up illustrations show Corner Protection A (#14) and Corner Protection B (#15) being attached to the top corners of the cabinet using Screws F (#41).
Note: Fully tighten the screws after all the corner protections are attached.
Step 9: Remove Top Corner Protection Brackets
Remove the top Corner Protection brackets from Model No. 16238 Mega Cabinet as shown in the illustration.
Diagram Description: An illustration of the Seville Classics UltraHD Mega Cabinet (Model No. 16238) is shown, highlighting specific corner brackets on the top that need to be removed.
Step 10: Remove Screws from Mega Cabinet
Remove the 6 corner screws from the top back panel of the Model No. 16238 Mega Cabinet.
Diagram Description: An illustration of the top back panel of the Model No. 16238 Mega Cabinet is shown, with 6 screws highlighted for removal.
Step 11: Attach Cabinet Stacker to Mega Cabinet
A. Place Cabinet Stacker Model No. WEB347 on top of Model No. 16238.
B. Attach the Left Front Bottom Corner Protection (#17-A), Right Front Bottom Corner Protection (#18-A), Right Back Bottom Corner Protection (#19-A), and Left Back Bottom Corner Protection (#20-A) to the bottom of the cabinet stacker. Use 26 pcs of Screw N (#54) to tighten.
Diagram Description: An illustration shows the Cabinet Stacker (WEB347) being placed on top of the Mega Cabinet (16238). Close-up views show the four bottom corner protections (#17-A, #18-A, #19-A, #20-A) being attached to the base of the stacker using Screw N (#54).
Step 12: Install Mounting Straps (#60)
A. Remove 1 pc Screw F (#41) from the back corner protection.
B. Attach the Mounting Strap (#60) to the back Corner Protection brackets using Screw O (#61) and Washer (#27).
C. Drill a hole in the wall with a 5/16" drill bit, insert the Wall Anchor (#55-A) into the hole.
D. Attach the other end of the Mounting Strap (#60) to the wall using Screw M (#55) and Washer (#27-B).
Repeat steps A through D to install the other mounting strap.
Diagram Description: Illustrations show the process of attaching the Mounting Strap (#60). One end attaches to the cabinet's back corner protection using Screw O (#61) and Washer (#27). The other end attaches to the wall using Screw M (#55) and Washer (#27-B), with a Wall Anchor (#55-A) inserted into the wall.
Warning: To prevent possible tipping, it is suggested that the Mounting Straps be installed. For safety, secure the mounting straps to wood studs whenever possible. ⚠️
Stainless Steel Maintenance
These parts have an UltraGuard® fingerprint resistant finish. Do not use traditional stainless steel cleaners on this unit. Lightly wipe off once a month with clean warm water and a soft cloth (preferably a micro fiber cloth). This is the safest formula to prevent new stains from appearing over time and manage unwanted fingerprints or grease marks. Remember to always wipe in the direction of the surface grain (NEVER ACROSS) and always use a lint-free cloth. Once the surface is clean, thoroughly wipe dry with a soft absorbent cloth.
Contact Information
If you are missing any parts, have any questions, or need additional assistance in assembly, please contact the bilingual (English and Spanish) customer service department at:
Seville Classics, Inc.
19401 Harborgate Way Torrance, CA 90501 USA
Telephone: (800) 323-5565 (within USA)
Fax: (310) 533-3899
Hours: 9:00am - 4:30pm (Pacific Standard Time)
E-mail: support@sevilleclassics.com
Website & Online Store: www.sevilleclassics.com
***Please visit our website or call and inquire about our additional UltraHD Line***
Other Seville Classics UltraHD® Products
UltraHD® Tall Storage Cabinet
- Model No. 16236 (Granite)
- Model No. 20143 (Graphite)
- Model No. 20153 (Red)
- Model No. 20133 (White)
UltraHD® Mega Storage Cabinet
- Model No. 16238 (Granite)
- Model No. 20148 (Graphite)
- Model No. 20158 (Red)
UltraHD® 4-Drawer Rolling Cabinet
- Model No. 20205 (Granite)
UltraHD® 6-Foot Height Adjustable Workbench
- Model No. 20292 (Granite)
UltraHD® Wall Cabinet with Open Shelf
- Model No. 20230 (Granite)
- Model No. 20140 (Graphite)
- Model No. 20150 (Red)
UltraHD® 2-Door Rolling Workbench
- Model No. 20262 (Granite)
- Model No. 20142 (Graphite)
- Model No. 20152 (Red)
UltraHD® Trash Bin
- Model No. 20215
UltraHD® Lighted Workcenter
- Model No. 20247 (Granite)
- Model No. 20246 (Graphite)
- Model No. 20157 (Red)
