Natural White Mobile 3-Bag Heavy-Duty Laundry Hamper Sorter Cart Use and Care Manual

Seville Classics WEB919 017641009194 0017641009194 1006701418

Natural White Mobile 3-Bag Heavy-Duty Laundry Hamper Sorter Cart Instructions / Assembly

[PDF] 3-Bag Laundry Hamper Sorter Cart

Thank you for choosing Seville Classics! We hope that you enjoy your new laundry sorter. Please read through this user guide for parts list, assembly.

• Google Docs
• Google Drive
• Download [pdf]
  

  File Info : application/pdf, 2 Pages, 753.66KB

  Document Document

Step 4.
Insert HANLDES (F) into BAGS (E).
Hang bags on crossbars to finish.

3-Bag Laundry Hamper Sorter Cart

Congratulations! Enjoy your new laundry sorter!

Care Instructions
Remove handle bars from bags and wash in cold water with non-chlorinated bleach. Lay flat to dry.
Specifications
Weight capacity: 10 lbs. per bag, 30 lbs total Dimensions: 19.5" D x 30" W x 33" H
Additional Laundry Bags (WEB127) available for purchase at www.SevilleClassics.com

072021

Customer Service Information
Telephone: (800) 323-5565 Fax: (310) 533-3899
Hours: 8:30 AM ­ 4:30 PM (PST) Email: Support@SevilleClassics.com Homepage: www.SevilleClassics.com

Model: WEB919
Thank you for choosing Seville Classics! We hope that you enjoy your new laundry sorter. Please read through this user guide for parts list, assembly instructions, frequently asked questions and contact information.
072021

Parts List
A. Top frames (2)

G. Wheels (2)

B. Frame poles (4)

H. Locking wheels (2)

C. Bottom frames (4)

I. Wrench (1)

D. Crossbars (4)

J. Screws (12)

E. Bags (3)

K. Hex wrench (1)

F. Handles (6)

L. Spacers (8)

Please make sure you have all the parts on this list.
If you're missing parts, contact us for replacements at (800) 323-5565 or send an email to Support@SevilleClassics.com
1

Assembly Instructions
Step 1.
Fit TOP FRAMES (A) over the tops of FRAME POLES (B).
Attach BOTTOM FRAMES (C) between FRAME POLES (B) with SCREWS (J) using HEX WRENCH (K).
Repeat steps for second frame.
Step 2.
Attach WHEELS (G) and LOCKING WHEELS (H) to opposite ends of frames using WRENCH (I).
Step 3.
Fit curved side of SPACER (L) over screw hole on inside of frame.
Fit SCREW (J) through outside of frame and through SPACER (L).
Hold the SCREW (J) steady with HEX WRENCH (K). Screw on the CROSSBAR (D) by hand.
Fit curved SPACER (L) onto opposite frame, and attach with SCREW (J) using HEX WRENCH (K).
Repeat for the remaining CROSSBARS (D).
2