ULTRADURABLE Commercial-Grade 5-Tier NSF Steel Wire Shelving
Model #: WEB691
Dimensions: 36" W x 18" D x 72" H
Thank you for choosing Seville Classics! This guide provides parts list, assembly instructions, FAQs, and contact information.
Additional Parts and Accessories
Available for purchase online at: www.SevilleClassics.com
- Shelf Labels
- Shelving Liners (36" x 18", 2-Pack) - Model No.: WEB046
- S-Hook (6-pack) - Model No.: WEB232
- Ultra Durable Shelf (36" x 18") - Model No.: WEB713
Assembly Video
View assembly online here: https://www.youtube.com/watch?v=N6iRVVqBG-1
Caution
- Place heavier items on the lower shelves and lighter ones on the top.
- Do not stand or climb on the shelving system.
- Do not drop heavy items on the system.
- Do not move the system while loaded.
Specifications
Assembled Dimensions: 36" W x 18" D x 72" H (75" H on wheels), 1" Pole Diameter
| Per shelf | Overall | |
|---|---|---|
| On leveling feet | 800 lbs. (362.8 kg) | 4000 lbs. (1814 kg) |
| On wheels | 100 lbs. (45.3 kg) | 500 lbs. (226.8 kg) |
The NSF logo indicates compliance with NSF standards for food safety and sanitation.
Customer Service Information
Seville Classics, Inc
Telephone: (800) 323-5565
Fax: (310) 533-3899
Hours: 8:30 AM – 4:30 PM (PST), Monday to Friday
Email: Support@SevilleClassics.com
Homepage: www.SevilleClassics.com
Parts List
Please ensure you have all the parts listed below before assembly.
- A. Bottom poles (4) (Threaded end)
- B. Top poles (4) (Plastic cap on end)
- C. Connectors (4) (May be attached to poles)
- D. Shelves (5)
- E. Slip sleeves (20)
- F. Leveling feet (4)
- G. Wheels (2)
- H. Locking wheels (2)
If you are missing parts, contact Seville Classics, Inc. at (800) 323-5565 or email Support@SevilleClassics.com for replacements.
Assembly Instructions
Step 1: Attach Feet or Wheels
Screw LEVELING FEET (F) or WHEELS (G, H) into the base of the bottom poles (A). Repeat for all four bottom poles.
Step 2: Install Slip Sleeves for Lowest Shelf
Snap SLIP SLEEVES (E) around the grooves on the BOTTOM POLES (A) at the desired height for your lowest shelf. Tip: Count the number of grooves from the bottom of the pole to ensure consistent shelf height.
Step 3: Place First Shelf
Fit SHELF (D) over the top of the 4 poles, ensuring it rests on the SLIP SLEEVES (E). Tip: If necessary, lightly tap shelves into place with a rubber mallet.
Step 4: Connect Top Poles
Screw CONNECTORS (C) into the top of the BOTTOM POLES (A). Then, screw TOP POLES (B) to the CONNECTORS (C). Tip: Connectors may be pre-installed.
Step 5: Add Remaining Shelves
Repeat STEPS 2 and 3 for each of the remaining shelves, working your way up the poles.
Congratulations! Enjoy your fully assembled shelving unit.
Seville Classics
