Assembly Instructions
Instructions de Montage
FULL BED
LIT COMPLET
This set included 2 boxes. If you do not receive the full 2 boxes, please contact our customer service team.
Cet ensemble comprenait 2 boîtes. Si vous ne recevez pas les 2 boîtes complètes, veuillez contacter notre service client.
If you have any questions, please feel free to contact us. Email: hdteam@aminalife.com
A diagram shows a full bed frame with a headboard and footboard.
Model Numbers: N709P266226K/N709P270379K
Detail View
Vue Détaillée
A diagram illustrates the components of the bed labeled with letters A through J. A is the back panel, B is the front panel, C is the back rail, D represents the legs, E are slats, F are slats, G is the center slat, H is the support leg, I is the right side panel, and J is the left side panel.
Part List (N709P266226K/N709P270379K)
Liste des Pièces
- A: Back Panel - 1PC
- B: Front Panel - 1PC
- C: Back Rail - 1PC
- D: Leg - 4PCS
- E: Slat - 2PCS
- F: Slat - 8PCS
- G: Center Slat - 1PC
- H: Support Leg - 3PCS
Part List (N709P266226H/N709P270379H)
Liste des Pièces
- I: Side Panel(R) - 1PC
- J: Side Panel(L) - 1PC
Hardware List (N709P266226K/N709P270379K)
Liste des Accessoires
| Item | Description | Quantity |
|---|---|---|
| 1 | Hex-Head bolts (5/16*50MM) | 4pcs |
| 2 | Hex-Head bolts (1/4*35MM) | 2pcs |
| 3 | Hex-Head bolts (5/16*20MM) | 8pcs |
| 4 | Lock washer (1/4) | 2pcs |
| 5 | Flat washer (1/4*19) | 2pcs |
| 6 | Flat washer (5/16*19) | 12pcs |
| 7 | Lock washer (5/16) | 12pcs |
| 8 | Screw (#4*30mm) | 20pcs |
| 9 | Allen Key (4mm) | 1pc |
Assembly Tools Required (Not Included)
Outils d'assemblage requis (non inclus)
Phillip head screwdriver is required.
Caution: Please be careful not to damage the hole position when you use power tools!
Attention: Ne pas utiliser des outils électriques pour assembler ce produit!
Assembly Steps
Step 1:
Étape 1:
A diagram shows how to connect side panels (I, J) to the headboard (A) and footboard (B) using hardware.
Step 2:
Étape 2:
A diagram shows the bed frame being assembled, connecting the side panels (I) to the front panel (B) and back rail (C) using hardware (3, 6, 7) and attaching the support leg (H).
Step 3:
Étape 3:
A diagram illustrates attaching the back panel (A) to the bed frame using hardware (1, 6, 7, 9).
Step 4:
Étape 4:
A diagram shows the installation of the slats (E) and center slat (G) using hardware (2, 4, 5, 9).
Step 5:
Étape 5:
A diagram shows the attachment of the support legs (H) to the slats using screws (8).
Step 6:
Étape 6:
A diagram shows the completed bed frame.
