Assembly Instructions

Instructions de Montage

Full Platform Bed with 6 Drawers

Lit Plateforme Complète avec 6 Tiroirs

If you have any questions, please feel free to contact us.

Email: hdteam@aminalife.com

Model Number: N708P263021

Part List

Liste des pièces

A Leg HB (right) - 1pc (Pied HB (droite))
A1 Leg HB (left) - 1pc (Pied HB (gauche))
A2 Upper horizontal bar HB - 1pc (Barre horizontale supérieure HB)
A3 Lower horizontal bar HB - 1pc (Barre horizontale inférieure HB)
B Leg FB (right) - 1pc (Pied FB (droite))
B1 Leg FB (left) - 1pc (Pied FB (gauche))
B2 Upper horizontal bar FB - 1pc (Barre horizontale supérieure FB)
B3 Lower horizontal bar FB - 1pc (Barre horizontale inférieure FB)
B4 Vertical bar - 3pcs (Barre verticale)
B5 Vertical bar - 2pcs (Barre verticale)
B6 Support bar - 4pcs (Barre de support)
C Side rail (front) - 1pc (Rail latéral (avant))
C1 Side rail (back) - 1pc (Rail latéral (arrière))
C2 Lower horizontal bar (front) - 1pc (Barre horizontale inférieure (avant))
C3 Lower horizontal bar (back) - 1pc (Barre horizontale inférieure (arrière))
C4 Slats - 4pcs (Lattes)
C5 Slats - 6pcs (Lattes)
C6 Lower support slat - 1pc (Latte de support inférieure)
D Lower horizontal bar - 2pcs (Barre horizontale inférieure)
E Front drawer panel - 6pcs (Panneau de tiroir avant)
E1 Back drawer panel - 6pcs (Panneau de tiroir arrière)
E2 Side panel - 2pcs (Panneau latéral)
E3 Drawer bottom - 6pcs (Fond de tiroir)
E4 Drawer bottom - 6pcs (Fond de tiroir)
F Leg support - 3pcs (Support pied)

Hardware List

Liste du matériel

1 Wood dowel (74pcs) (Cheville en bois) Ø8*30mm
2 Hex-Head bolts (20pcs) (Boulons à tête hexagonale) (Ø15)1/4"*80mm
3 Hex-Head bolts (38pcs) (Boulons à tête hexagonale) (Ø12)1/4"*60mm
4 Horizontal-Hole bolts (58pcs) (Boulons à trou horizontal) 1/4"*15 (9.5mm)
5 Hex-Head bolts (4pcs) (Boulons à tête hexagonale) (Ø12)1/4"*50mm
6 Hex-Head bolts (4pcs) (Boulons à tête hexagonale) (Ø12)1/4"*40mm
7 Hex-Head bolts (4pcs) (Boulons à tête hexagonale) (Ø12)1/4"*30mm
8 Wood screws (24pcs) (Vis) Ø4*30mm
9 Wood screws (26pcs) (Vis) Ø3.5*15mm
10 Metal handle (6pcs) (Ph zinc (bouton)) L128*24*18mm
11 Ph zinc(Knob) (12pcs) (Ph zinc (bouton)) 5/32"*10mm
12 Lower slider drawer (6pcs) (Tiroir coulissant inférieur) 365*58*28 mm
13 Upper slider drawer (6pcs) (Tiroir coulissant supérieur) 340*30mm
14 Metal bracket (2pcs) (Support métallique) 75*20*2 mm
15 Allen key (1pc) (Clé Allen) (1/4")4.5*58mm

Assembly Tools Required (Not Included): Phillip head screwdriver

Caution: Please be careful not to damage the hole position when you use power tools!

Assembly Steps

Step 1:

Attach part 4 to the frame using hardware 2 and 4. Ensure part 4 faces up with the "x" mark on it for proper tightening.

Step 2:

Attach part 14 to the frame using hardware 9.

Step 3:

Continue assembling the frame using hardware 1, 5, and 7.

Step 4:

Continue assembling the frame using hardware 1, 5, and 7.

Step 5:

Attach parts using hardware 2 and 4.

Step 6:

Attach parts using hardware 6.

Step 7:

Assemble the bed frame using hardware 1, 3, 4, and 12.

Step 8:

Continue assembling the bed frame using hardware 1, 2, 3, 4, 6, and 12.

Step 9:

Assemble leg support (F) with lower support slat (C6). Rotate and move the support slat inside the bed frame.

Step 10:

Position the support slats (C6) within the bed frame.

Step 11:

Attach the bed slats (C5) to the side rails (C4) using hardware 8. Ensure the slats are close to the side rail before tightening screws to prevent breakage. Do not overtighten screws on the outermost edge.

Step 12:

Assemble drawer components using hardware 1, 3, and 4.

Step 13: