Corner Cabinet

Assembly Instructions

Safety Warning

Serious or fatal crushing injuries can occur from furniture tip-over.

ALWAYS secure this furniture to the wall using tip-over restraints.

To further reduce the risk of serious injury and death from tip-overs:

• Place heaviest items in the lower drawer.
• Do not set TVs or other heavy objects on top of this product.
• Never let children climb or hang on drawers, doors, or shelves.

Parts List

Main Components

Hardware

Assembly Steps

Step 1

Attach part 1 to parts 5 and 10 using 6x Screw A, 2x Screw D, and 1x Bracket R.

[Diagram: Shows part 1 being connected to other parts with specified hardware.]

Step 2

Attach part 5 to parts 4 and 10 using 10x Screw A, 1x Connector M, and 2x Screw N.

[Diagram: Shows part 5 being connected to other parts with specified hardware.]

Step 3

Connect parts 8 and 9 to part 10 using 2x Screw A and 2x Screw B.

[Diagram: Shows parts 8 and 9 being attached to part 10.]

Step 4

Attach part 3 and part 7 to part 8 using 2x Screw C and 2x Screw E.

[Diagram: Shows parts 3 and 7 being attached to part 8.]

Step 5

Attach part 6 and part 3 to part 7 using 4x Screw C and 5x Screw E.

[Diagram: Shows parts 6 and 3 being attached to part 7.]

Step 6

Attach parts 7, 6, and 8 to part 9 using 8x Screw Q and 4x Support U.

[Diagram: Shows parts 7, 6, and 8 being attached to part 9.]

Step 7

Connect part 1 to the assembled structure using 6x Screw B and 8x Screw C.

[Diagram: Shows part 1 being attached to the top of the cabinet structure.]

Step 8

Attach part 4 to parts 6 and 7 using 6x Screw C and 4x Screw F.

[Diagram: Shows part 4 being attached to the lower section of the cabinet.]

Step 9

Connect part 11 to parts 12 and 13 using 2x Screw C and 2x Screw E.

[Diagram: Shows part 11 being attached to parts 12 and 13.]

Step 10

Attach parts 11 and 12 to parts 13 and 14 using 6x Screw Q and 4x Support U.

[Diagram: Shows parts 11 and 12 being attached to vertical dividers 13 and 14.]

Step 11

Connect part 5 to parts 11 and 12 using 6x Screw C and 4x Screw V.

[Diagram: Shows part 5 being attached to the structure with screws.]

Step 12

Attach part 15 to part 16 using 2x Screw E.

[Diagram: Shows part 15 being attached to part 16.]

Step 13

Attach part 17 to parts 15 and 16 using 4x Screw Q.

[Diagram: Shows part 17 being attached to the base supports.]

Step 14

Connect parts 11, 5, 15, and 16 using 6x Screw B and 6x Screw C.

[Diagram: Shows the base structure being assembled with the main cabinet body.]

Step 15

Attach parts 11 and 12 to parts 6 and 7 using 4x Screw B and 6x Screw C.

[Diagram: Shows the final attachment of shelves/panels to the side panels.]

Step 16

Assemble drawer components. For each of the two drawer base assemblies (parts 18 and 19), attach 2x Handle G and 4x Bolt H. Use 12x Screw D and 4x Screw S.

[Diagram: Shows assembly of drawer base components with hardware.]

Step 17

Attach 2x Cover Cap O and 2x Screw P to the drawer assemblies (part 20).

[Diagram: Shows attachment of caps and screws to drawer parts.]

Step 18

Complete drawer assembly. Attach drawer parts 20 using 12x Screw D, 2x Handle G, 4x Bolt H, and 4x Screw S.

[Diagram: Shows final assembly of drawer units.]

Step 19

Attach 8x Clip T to the interior of the cabinet shelves.

[Diagram: Shows clips being attached to the inside of the cabinet.]

Step 20

Insert shelves (part 2) into the cabinet.

[Diagram: Shows shelves being slid into place.]

Step 21

Attach doors (parts 18 and 19) to the cabinet frame using 16x Screw D.

[Diagram: Shows doors being attached to the cabinet.]

Step 22

Attach top decorative pieces (part 1) using 2x Screw J and 2x Screw L.

[Diagram: Shows decorative top pieces being attached.]

Step 23

Wall Mounting (Anti-Tip Device Installation)

Drill 2 holes on the wall at the required position for anti-falling device installation.

Secure the cabinet to the wall using 2x Screw K and 2x Screw I (wall anchors).

[Diagram: Shows drilling into a wall and securing the cabinet with anchors and screws.]