Garvee 10x20 FT Carport Assembly and Installation Guide
Introduction and Important Information
Attention: Please read the manual completely before starting the installation. A ladder and an electric drill are recommended for assembly.
Please confirm that all parts are complete and undamaged. If any parts are missing or damaged, please contact customer support via email or the seller.
Customer Support Email: dexso_service@outlook.com
Information to Provide for Support:
- Order number
- Model number
- Item Number
- Photos of missing/damaged parts (optional)
Steps to Contact Seller (Amazon.com orders only):
- Log into your Amazon account.
- Go to "Your Orders" and find the purchase.
- Click on "Contact Seller".
Arrange and classify the parts neatly to facilitate installation.
Parts List
| Item No. | Item Name | Reference Image Description | Quantity |
|---|---|---|---|
| 1 | Steel Pipe | Long pipe with multiple connection points. | 9 PCS |
| 2 | Steel Pipe | Shorter pipe with multiple connection points. | 8 PCS |
| 3 | Steel Pipe | Shorter pipe with multiple connection points. | 8 PCS |
| A | 3-Way Corner Connector | Connector piece with three openings for pipes. | 6 PCS |
| B | 4-Way Corner Connector | Connector piece with four openings for pipes. | 6 PCS |
| D | Foot Plate | Base plate with a central hole and securing mechanism for vertical poles. | 8 PCS |
| Ground Peg | Metal peg for anchoring the structure to the ground. | 24 PCS | |
| M6 x 50MM Screw | Fastening screw. | 8 PCS + 2 PCS Spares | |
| Rope | Cord for securing the structure. | 8 PCS | |
| Anchor | Tent stake or anchor for ground securing. | 4 PCS | |
| Bungee Cords | Elastic cords for fastening the cover. | 56 PCS + 3 PCS Spares | |
| Top Cover | Fabric cover for the carport. | 3 PCS |
Assembly Instructions
Step 1: Assemble Long Roof Pipes
Assemble the three required long pipes for the top of the carport. Each assembled pipe will be 20 feet long. For each long pipe, use:
- Part 1 (Steel Pipe): 3 pieces
- Part A (3-Way Corner Connector): 2 pieces
- Part B (4-Way Corner Connector): 2 pieces
Diagram Description: Shows a long pipe with connectors labeled '1', 'A', and 'B' at intervals, indicating the assembly of individual roof beams. Required parts are listed: 9x '1', 6x 'A', 6x 'B'.
Step 2: Form the Carport Roof Frame
Connect the three assembled 20-foot long pipes using pipe 2 (Steel Pipe) to create the basic carport roof frame.
Diagram Description: Illustrates the connection of multiple pipe sections using shorter pipes (labeled '2') to form the main roof structure. Close-up views show how pipes are joined.
Step 3: Attach Vertical Supports
Connect the vertical support pipes (Part 3) to the top frame. These pipes attach to the corner connectors (A and B) of the roof structure.
Diagram Description: Shows the overall carport structure with vertical pipes (labeled '3') extending downwards from the roof frame's corner connectors. Foot plates (labeled 'D') are shown at the base of these vertical pipes.
Step 4: Attach Foot Plates
Connect the Foot Plates (Part D) to the bottom of the vertical support pipes (Part 3). This provides a stable base for each leg of the carport.
Diagram Description: Close-up views show the attachment of foot plates (D) to the base of the vertical pipes (3), often with screws.
Step 5: Secure the Structure to the Ground
Fix the structure to the ground using the provided ground pegs, ropes, and anchors. Ensure the structure is stable and taut.
Diagram Description: Depicts the carport frame anchored to the ground. It shows ground pegs (labeled 'Ф3') being driven into the ground, with ropes connecting the frame to the pegs. Anchors are also shown.
Step 6: Install the Top Cover
Drape the Top Cover over the assembled frame. Fasten the door side and other edges of the cover using the bungee cords. Approximately 6 bungee cords are used for each side.
Attention: Be sure to cover the top at this stage, as it may be difficult to install later.
Diagram Description: Shows the top cover being placed onto the carport frame. Arrows indicate the downward placement. Close-up views illustrate how bungee cords are used to secure the cover to the frame.
Contact Information
For any issues or inquiries:
Phone: +1(888) 857-8979
Email: support@garvee.com / info@garvee.com
If the product is damaged during transportation, please contact the platform from which it was purchased for an exchange. For accessories, contact the brand's after-sales customer service.
