Product ID: QUTQ6
Distributed by Garvee.com
[QR code for support]
A line drawing depicts a modern house with a swimming pool and lounge chairs.
Product Overview
This document provides information and assembly instructions for the Garvee QUTQ6 product.
A line drawing shows a tall, rectangular decorative screen with a repeating geometric pattern of interlocking circles. This product is designed for outdoor use.
Parts List
| Part | Description | Quantity |
|---|---|---|
| A | Decorative Panel | 4 |
| B | Base Support | 2 |
| C | Connecting Beam | 2 |
| D | Vertical Support Frame | 2 |
| E | Horizontal Connector | 2 |
| F | Screws | 30 |
| G | Nuts | 26 |
Assembly Instructions
Follow these steps to assemble your Garvee QUTQ6 decorative screen.
Step 01: Assemble Bases
Connect the Connecting Beams (C) to the Base Supports (B) using screws (F).
Visual: Two base supports (B) are shown, with two connecting beams (C) being attached to them using screws.
Step 02: Attach Vertical Frames and First Panels
Attach the Vertical Support Frames (D) to the assembled bases (B) using screws and nuts (F, G).
Next, attach the Decorative Panels (A) to the Vertical Support Frames (D) using screws and nuts (F, G).
Visual: Vertical frames (D) are attached to bases (B), and then decorative panels (A) are attached to the vertical frames.
Step 03: Install Remaining Panels
Attach the remaining two Decorative Panels (A) using the Horizontal Connector pieces (E) and screws/nuts (F, G).
Visual: Two more decorative panels (A) are shown being attached, with horizontal connector pieces (E) used to secure them.
Step 04: Final Assembly
Ensure all parts are securely fastened. The assembly is now complete.
Visual: A line drawing of the fully assembled decorative screen.
Support & Contact Information
For questions, problems, or missing parts, please contact Garvee support:
- Support Email: support@garvee.com
- Customer Phone Service: +1 888 891 2855
- Hours: Monday - Friday, 9 AM to 5 PM (PST)
Important Disclaimers and Safety Information
Liability Exemption:
- Garvee is not liable for issues such as rust, peeling coatings, or structural deformation caused by force majeure factors like climatic conditions or humidity.
- Garvee is not liable for product damage resulting from consumer misuse, such as overloading, scratching with sharp objects, or contact with corrosive substances.
- If you choose to install the product yourself, Garvee is not liable for personal injury or property damage resulting from improper installation, such as product collapse.
Special Notes & Precautions:
- Consumers must take necessary safety precautions during installation.
- Ensure children and pets are properly protected when in contact with the product to prevent accidents such as bumps or scratches.
