GARVEE Outdoor Screen Panel
Product ID: 7AUG2
Model/Version: V250823NE2S
Product Overview
This document provides information and assembly instructions for the GARVEE Outdoor Screen Panel, Product ID 7AUG2.
Assembly Instructions
Please follow these instructions carefully to assemble your GARVEE Outdoor Screen Panel.
Parts Identification
The following parts are included:
1PCS Configuration Parts:
- Panel Section A: 2 pieces
- Panel Section B: 2 pieces
- Connector C: 1 piece
- Base/Support D: 4 pieces
2PCS Configuration Parts:
- Panel Section A: 4 pieces
- Panel Section B: 4 pieces
- Connector C: 2 pieces
- Base/Support D: 8 pieces
Assembly Steps
The diagrams demonstrate the process of connecting panel sections and securing them with bases.
Ensure all connections are secure during assembly.
Support and Contact Information
For questions, problems, or missing parts, please contact GARVEE.com:
- Support Email: support@garvee.com
- Customer Phone Service: +1 888 891 2855
- Support Hours: Monday - Friday, 9 AM to 5 PM (PST)
You can also scan the QR code provided on the first page for quick access to support resources.
Safety and Liability Information
Please read the following disclaimers and safety notes carefully before installation and use.
Liability Exemption
GARVEE is not liable for issues such as rusting, peeling of coatings, or structural deformation caused by force majeure factors (e.g., extreme weather conditions, high humidity). Compensation or repair for such issues is not guaranteed.
GARVEE is not liable for product damage resulting from consumer misuse, including but not limited to overloading, scratching with sharp objects, or contact with corrosive substances.
Installation Risk Disclaimer
If consumers choose to install the product themselves, GARVEE is not liable for any personal injury or property damage that may occur due to improper installation, such as the product collapsing.
Special Notes for Consumers
During installation, consumers must adhere to necessary safety precautions. Ensure children and pets are properly supervised and protected when in contact with the product to prevent accidents such as bumps or scratches.