One For All WM4411 Solid TV Wall Mount
Quick Installation Guide
Product Information
Congratulations on the purchase of this One for All product! The product you now have in your possession is made of durable materials and is based on a design, every detail of which has been meticulously thought out. That is why One for All gives you a 10-year guarantee for defects in materials or manufacturing.
Maximum Load Capacity: 100 kg
Suitable for TVs: up to 65 inches
VESA Compatibility: Not specified, but implied by included hardware.
Package Contents
Package M (Mounting Hardware)
- M5x14 screws (x4)
- M6x14 screws (x4)
- M6x30 screws (x4)
- M8x30 screws (x4)
- M8x50 screws (x4)
- D5 washers (x4)
- D8 washers (x4)
- Small spacers (x8)
- Large spacers (x8)
Package W (Wall Mounting Hardware)
- ST6.3x55 screws (x5)
- D6 washers (x5)
- Concrete anchors (x5)
Installation Instructions
Step 1: Prepare the Wall Mount Arms
Attach the mounting arms (A and B) to the wall plate (C) using the provided screws (M-A, M-B, M-C, M-D, M-E) and washers (M-F, M-G). Ensure the correct screws and spacers are used based on the TV's VESA mounting pattern. The diagram shows different screw lengths and spacers for various VESA hole configurations.
Step 2: Mark and Drill Holes
WARNING: Ensure the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Hold the wall plate against the wall at the desired height. Use a level to ensure it is straight. Mark the drill hole locations. Drill holes using the appropriate drill bit size (e.g., Ø4.5mm for concrete anchors). Insert the concrete anchors (W-B) into the drilled holes.
Step 3: Mount the Wall Plate
Secure the wall plate to the wall using the provided screws (W-A) and washers (W-C), screwing them into the concrete anchors.
Step 4: Attach Arms to TV
Attach the mounting arms (A and B) to the back of your TV using the appropriate screws (M-A/M-B/M-C or M-C/M-D/M-E) and spacers (M-G or M-H) as indicated by your TV's VESA pattern. Ensure the arms are oriented correctly (top of the TV).
Step 5: Hang TV on Wall Plate
Carefully lift the TV and hook the mounting arms onto the wall plate. Ensure the TV is securely seated.
Step 6: Secure the TV
Use the provided safety screws or locking mechanisms to secure the TV to the wall plate, preventing accidental dislodging.
FINISH
Guarantee Information
One for All provides a 10-year guarantee for defects in materials or manufacturing. The guarantee terms and conditions cover repair or replacement of the product at One for All's discretion. It excludes normal wear and tear, and is void if the product is not installed or used according to instructions, modified by unauthorized parties, or damaged by external causes.
Contact Information:
UNIVERSAL ELECTRONICS BV, COLOSSEUM 2, 7521 PT ENSCHEDE, THE NETHERLANDS
Argentina: One For All Argentina Srl. Sucre 1530, Oficina 507, CP 1428 Ciudad Autónoma de Buenos Aires, Argentina. Tel: +5411-4807-3434
Brazil: Opeco Operacoes Comerciais Imp. Exp. Ltda. CNPJ.: 68.926.641/0001-05 Rua General Flores, no 74, Sao Paulo – SP. E-Mail: opecoservice@opeco.com.br
Important Warnings
Correct installation is essential and falls outside the scope of responsibility of One for All. The provided fastening material is intended for walls made of solid wood, bricks, concrete, or solid-wood columns with a maximum of 3 mm wall finishing. For walls made of other materials (e.g., hollow bricks), consult your installer and/or specialist supplier. Always follow the installation and use instructions of the apparatus to be installed/fixed (e.g., the LCD/plasma screen).
