One For All WM5222 Quick Installation Guide
Congratulations on your purchase of the One For All WM5222. This guide provides essential information for installation and warranty.
Warranty Information
One For All provides a 3-year guarantee for defects in materials or manufacturing for this product. The guarantee covers repair or replacement at One For All's discretion, free of cost, if faults arise during the guarantee period due to manufacturing or material defects. Normal wear and tear is expressly excluded.
To invoke the guarantee, the product must be sent to One For All with the original purchase document (invoice, sales slip, or cash receipt) clearly showing the supplier's name and date of purchase.
The One For All guarantee lapses in the following cases:
- If the product has not been drilled, installed, and used in accordance with the Instructions for Use.
- If the product has been altered or repaired by a party other than One for All.
- If a fault arises due to external causes (outside the product) such as lightning, water nuisance, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents, or acids, wrong use, or negligence.
- If the product is used for different equipment than is mentioned on or in the packing.
Installation Instructions
This section details the installation process for the WM5222 mount.
Parts Included
- A (x1): M4x14mm screws
- B (x2): M6x14mm screws
- C (x1): M8x16mm screws
- D (x1): ST4.8x38 screws
- E (x1): Ø6x30mm bolts
- F (x1): Mounting arms/plate
- G (x1): Wall mounting hardware
Installation Types
Wall Mountable
This method involves mounting the bracket directly to a wall. The process starts with attaching the wall mounting hardware (G) to the wall, ensuring it is secure. The main bracket (F) is then attached to this hardware. This is indicated by the "START" and "FINISH" steps.
Visual Description: Shows a wall with the wall mount hardware (G) secured, followed by the main bracket (F) being attached to it.
VESA Mounted On TV
This method focuses on attaching the mounting arms (F) to the back of the television using the VESA mounting holes. Screws A and B are typically used for this purpose. The process begins with attaching the arms to the TV and concludes the TV-specific part of the installation.
Visual Description: Depicts a TV screen with the mounting arms (F) screwed into the VESA pattern on the back of the TV using screws (A, B).
Bracket Mounted
This is a combined process. First, the mounting arms (F) are attached to the TV using screws (A, B). Then, the assembled TV unit is connected to the wall bracket (G), potentially using additional hardware like C, D, or E depending on the specific setup. The process is marked by "START" and "FINISH" stages.
Visual Description: Shows the TV with arms attached, then the TV assembly being connected to the wall bracket, possibly using screws (C, D, E) and bolts (B).
General Notes: Follow the sequence indicated by "START" and "FINISH". Ensure all parts are correctly aligned before tightening. For disposal of waste, please follow local regulations and visit oneforall.com/documents.
Connect with Us
Find support and connect with One For All:
- Facebook: facebook.com/oneforallworldwide
- Instagram: @oneforall.worldwide
- LinkedIn: company/one-for-all-worldwide/
- YouTube: user/oneforallproducts
Also, explore the One For All Assistant App for additional support.
Manufacturer: UNIVERSAL ELECTRONICS BV, COLOSSEUM 2, 7521 PT ENSCHEDE, THE NETHERLANDS
One For All Documents | One For All
