Key Features
- Supports TVs up to 50 kg
- Suitable for screens up to 90 inches
- VESA Universal compatibility: up to 600 x 400 mm
- Ultra Slim design
- Adjustable tilt angle: 0° or -15°
Package Contents
Package M (Wall Mounting Parts)
- 4 x M5x14mm screws
- 4 x M6x14mm screws
- 4 x M6x30mm screws
- 4 x M8x12mm screws
- 4 x M8x30mm screws
- 4 x M8x50mm screws
- 4 x D6 wall plugs
- 8 x Ø15xØ8x5mm washers
- 8 x Ø15xØ8x15mm washers
Package W (TV Mounting Parts)
- 2 x ST6.3x55mm screws
- 2 x Ø10x50mm spacers
- 2 x D6 wall plugs
- [FISCHER fixing systems]
Tools Required (Not Included)
- Drill
- Appropriate drill bit (e.g., 4.5mm for D6 wall plugs)
- Screwdriver
- Level
- Pencil
Installation Guide
Step 1: Mark Drilling Points
Use the provided drill guide template to mark the desired mounting points on the wall. Ensure the template is level.
[Drill Guide Template]
Step 2: Wall Support Warning
⚠️ WARNING: Please verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
Step 3: Attach Wall Plate
Drill holes at the marked points using the appropriate drill bit size (e.g., 4.5mm for D6 wall plugs). Insert wall plugs if necessary. Securely attach the wall plate (A) to the wall using the provided screws (e.g., ST6.3x55mm screws (W-A) or others depending on wall type).
[Diagram showing drilling and attaching wall plate]
Step 4: Attach Brackets to TV
Attach the TV brackets (B) to the back of your TV using the appropriate screws (e.g., M5x14mm (M-A), M6x14mm (M-B), M6x30mm (M-C), M8x12mm (M-D), M8x30mm (M-E), M8x50mm (M-F)). Use washers (M-G, M-H, M-I) as needed. ✋ Note: Do not attach EVA pads (if included) when the TV exceeds 15 kg; skip this step.
[Diagram showing TV brackets attached to TV]
Step 5: Mount TV onto Wall Plate
Carefully lift the TV and hook the attached brackets onto the wall plate. Ensure it is securely seated.
VESA Compatibility Check:
- For VESA 200x100, 200x200, 300x200, 400x200: Use parts as shown in diagram 5b.
- For VESA 300x300, 300x400, 400x400, 600x400: Use parts as shown in diagram 5a.
[Diagram showing TV being mounted onto wall plate]
Step 6: Adjust Tilt Angle
Adjust the TV to the desired tilt angle, between 0° and -15°.
[Diagram showing tilt adjustment]
Step 7: Finish
Ensure all connections are secure. Your TV is now mounted.
[Finish indicator]
Warranty Information
ONE FOR ALL offers a Lifetime Guarantee for defects in materials or manufacturing. The guarantee is valid provided the product is installed and used according to the instructions. It does not cover normal wear and tear, damage from external causes (lightning, water, fire, extreme temperatures, etc.), or improper use. For warranty claims, the product must be returned with the original proof of purchase.
