About the Product
Congratulations on the purchase of this One For All product! The WM4452 SOLID is made of durable materials and is based on a design where every detail has been meticulously thought out. One For All provides a 10-year guarantee for defects in materials or manufacturing.
Guarantee Terms and Conditions
One For All guarantees that if, during the guarantee period, faults arise due to defects in manufacturing and/or materials, they will, at their discretion, repair or replace the product free of cost. A guarantee for normal wear and tear is expressly excluded.
To invoke the guarantee, the product must be sent to One For All together with the original purchase document (invoice, sales slip, or cash receipt). The purchase document must clearly show the supplier's name and the date of purchase.
The One For All guarantee shall lapse in the following cases:
- If the product has not been drilled, installed, and used in accordance with the Instructions for Use.
- If the product has been altered or repaired by a party other than One for All.
- If a fault arises due to external causes (outside the product) such as lightning, water damage, fire, scuffing, exposure to extreme temperatures, weather conditions, solvents or acids, wrong use, or negligence.
- If the product is used for different equipment than is mentioned on or in the packing.
Manufacturer: UNIVERSAL ELECTRONICS BV, COLOSSEUM 2, 7521 PT ENSCHEDE, THE NETHERLANDS
Important Warning
Correct installation is extremely essential and falls outside the scope of responsibility of One for All. The fastening material provided is exclusively intended for installation on walls made of solid wood, bricks, concrete, or solid-wood columns with a maximum of 3 mm wall finishing. For walls made of other materials, for example, hollow bricks, please consult your installer and/or specialist supplier. During installation, please also follow the instructions for installation and use of the apparatus to be installed/fixed (for example, the LCD/plasma screen).
Installation Guide
Product Specifications:
- Maximum Load: 50 kg
- Screen Size: Up to 65 inches
- VESA Compatibility: Universal, up to 400 x 400 mm
- Extension Range: 60 mm - 473 mm
Included Parts:
| Part Code | Description | Quantity |
|---|---|---|
| A | Wall Plate | x1 |
| B | Vertical Brackets | x2 |
| C | Cable Management Cover | x1 |
| M-A | M5x14 Screw | x4 |
| M-B | M6x14 Screw | x4 |
| M-C | M6x30 Screw | x4 |
| M-D | M8x30 Screw | x4 |
| M-E | M8x50 Screw | x4 |
| M-I | M8x12 Screw | x4 |
| M-F | Washer | x4 |
| M-G | Small Spacer | x8 |
| M-H | Big Spacer | x8 |
| W-A | ST6.3x55 Screw | x6 |
| W-B | Concrete Anchor | x6 |
| W-C | D6 Washer | x6 |
Installation Steps:
Step 1: Prepare Wall Mounting
Use the provided "DRILL GUIDE" template to mark the drilling points on the wall. Drill holes with a 10mm diameter, approximately 55mm deep. If mounting on concrete, insert the concrete anchors (W-B) into the drilled holes.
Step 2: Mount the Wall Plate
Attach the Wall Plate (A) to the wall using the ST6.3x55 screws (W-A) and D6 washers (W-C), securing them into the wall anchors (W-B) or directly into a solid wall structure.
Step 3: Attach Brackets to TV
Select the appropriate screws (M-A through M-I) and spacers (M-G, M-H) based on your TV's VESA mounting pattern and depth. Attach the Vertical Brackets (B) securely to the back of your TV.
Step 4: Hang TV on Wall Plate
Carefully lift the TV and hook the Vertical Brackets (B) onto the Wall Plate (A).
Step 5: Secure the TV
Ensure the TV is securely attached. Use the provided safety screws or locking mechanisms to prevent the TV from accidentally dislodging.
Step 6: Adjustments
Adjust the tilt angle of the TV as desired, within the range of +10° to -20°.
Step 7: Cable Management
Attach the Cable Management Cover (C) to organize and hide cables.
Important: Please verify that the supporting surface will safely support the combined weight of the equipment and all attached hardware and components.
For more information and documentation, visit: http://www.oneforall.com/documents
Waste Disposal: Please separate waste materials for recycling.
One For All Documents | One For All
