Flomasta Type 21 Double-Panel Plus Single Convector Radiator - Installation and Care Manual

Product Overview

EN: Steel Panel Radiator. Panel radiators comply with EN 442, and are manufactured under quality management system approved by EN ISO 9001, an environmental management system approved by EN ISO 14001, and an occupational health and safety management system approved by ISO 45001. Maximum operating pressure: 10 Bars. Maximum operating temperature: 120°C.

FR: Radiateur en acier. La production du radiateur à panneaux est exécutée conformément aux standards EN 442 et par les systèmes de gestion approuvés de qualité EN ISO 9001, d'environnement EN ISO 14001, de santé et de la sécurité de travail ISO 45001. La Pression maximale de fonctionnement: 10 Bars. Le Chaleur maximale de fonctionnement: 120°C.

EN IMPORTANT: These instructions are for your safety. Please read through them thoroughly prior to handling the product and retain them for future reference.

FR IMPORTANT: Ces instructions sont données pour votre sécurité. Merci de les lire attentivement avant de manipuler le produit et de les conserver pour référence.

Parts List

• 01. Radiator Body (x1)
• 02. Brackets (x4-6)
• 03. Wall Plugs (x2-3)
• 04. Thermostatic Radiator Valve (x1)
• 05. Bleed Valve (x1)
• 06. Screws for Wall Plugs (x4-6)
• 07. Screws for Brackets (x4-6)
• 08. Blanking Plug (x1)

What You Will Need

• Drill
• 8mm Drill Bit
• Screwdriver
• Spirit Level
• Gloves
• Wrench
• Safety Glasses
• Pencil
• PTFE Tape

Specifications and Dimensions

Safety and Warnings

Before You Start

• Check that all components are present and that you are ENTIRELY happy with the size, design, and finish before starting installation.
• Locate blind plug, purge plug, and fastenings in the package. Remove carefully to avoid damaging the radiator's paint.
• Contact the supplier immediately if any parts are missing or damaged.
• Radiator must be installed using the supplied brackets.
• Fixings are for solid wall connections. For hollow walls (e.g., plasterboard), fix to internal timbers or use appropriate fixings.
• Before drilling or fixing into walls, floors, or ceilings, check for any pipes and wires.
• Remove and dispose of plastic caps on threaded connections before installation.
• Position the radiator for easy connection to the central heating system. Use dimensioned sketches to drill holes correctly.
• Radiator valves are not supplied and must be installed. A thermostatic valve is recommended for comfort and economy.
• Fitting reflective panels behind the radiator can improve efficiency.

Safety

• Never allow children or persons unable to operate the appliance safely to use it without supervision.
• Dispose of plastic bags carefully and keep them away from children.
• Note that the contents include small/sharp components that should be handled with care. Keep away from children.
• Lift the radiator using correct posture, holding from both ends. Call for assistance if too heavy.

Warning

• Once fitted, the radiator requires plumbing and commissioning into a central heating system. Seek professional advice if unsure.
• Panel radiators must never be left without water, as this can cause corrosion and perforation. Frequent changes of water and refilling with oxygen-rich water accelerate corrosion.
• Do not use panel radiators in outdoor areas. Ambient temperature should not fall below 0°C to prevent freezing damage.
• This radiator is NOT recommended for centralized national heating systems. Use in such systems may reduce warranty to 2 years due to potential corrosion.
• Read all instructions carefully and ensure they are fully understood before fitting.
• The radiator surface can reach very high temperatures; keep children and persons with disabilities supervised.
• Do not hang heavy objects or lean body weight against the radiator.
• Never cover the top of the radiator, as this reduces heating efficiency and can cause corrosion.

Important Notes

• Read and follow all safety rules and operating instructions before using the product.
• Even if packaged, radiators should not be exposed to external environmental conditions (rain, snow, sun). Store in dry, closed conditions.
• Do not remove shrink-wrap packaging until the radiator is ready for wall fitting. Radiators with plaster or paint applied cannot be cleaned or restored.
• Installation should be carried out by a qualified professional in accordance with relevant British and European Standards (BS7593:2006 & EN14336:2004).
• This radiator is made from mild steel and is susceptible to corrosion. Install only in systems with a chemical inhibitor added to the water circuit. Apply the correct inhibitor after installation as per manufacturer guidelines. Maintain correct water pressure. Consult a plumber if unsure.
• This mild steel radiator is not suitable for 'direct central heating systems' (where hot water is also used for taps). Use an aluminium or stainless steel radiator for such systems. Consult a plumber if unsure.
• Ensure the central heating system is isolated before any work.
• Use correct tools and fittings, and wear necessary PPE.

Assembly Instructions

Step 01: Mounting Brackets

This step illustrates three mounting bracket configurations (T11, T21, T22) for different radiator types. Each diagram shows bracket placement on a wall with specific measurements for height and distance from the bottom (e.g., 84±2/99±2 mm, 48±2/63±2 mm, 31±2/46±2 mm). A minimum wall clearance of 110 mm is indicated.

Step 02: Prepare Wall Fixings

The diagram shows marking the wall for bracket positions. It then illustrates drilling holes using an 8mm drill bit (Ø8 mm) and inserting wall plugs (part 06) into the holes. An arrow indicates the direction of insertion.

Step 03: Attach Brackets

This step shows the wall brackets (part 07) being securely attached to the wall using screws.

Step 04: Assemble Radiator Frame

The diagram depicts the assembly of the radiator's frame structure, showing how the side panels and top/bottom bars connect to form the support for the radiator body.

Step 05: Mount Radiator

This illustration shows the main radiator body (part 01) being attached to the assembled frame.

Step 06: Install Valves

The final assembly step shows the thermostatic radiator valve (part 04) and the bleed valve (part 05) being mounted onto the radiator connections. A torque specification of 10 Nm is indicated for tightening the valves.

Operation

EN: To put the radiator into use, open the radiator valve. Make sure that the central heating system is operating. Check if the radiator gets warm. If not, take all the air out of the radiator until water comes out, by loosening the bleed valve with a bleed key or screwdriver. In case of a problem, get authorized service support.

FR: À la suite de la mise en fonctionnement de votre système de chauffage, mettre le radiateur en exploitation en ouvrant la vanne de radiateur. Vérifier si votre radiateur s'est réchauffé ou pas. S'il ne l'est pas, décharger l'air jusqu'à ce que de l'eau chaude se dégage en desserrant l'aiguille du stoppeur purgeur avec sa clé appropriée.

Care and Maintenance

EN: Wipe the surface clean with a soft, damp cloth. Never use any solvents, scourers, abrasives, bleach, acids, strong detergents, aggressive chemical cleaners, or solvent-type cleaning solutions on the product. When disposing of this radiator, it should be sent to a metal recycle centre, following local rules. To prevent issues with returns, check with the store if spare parts are available.

FR: Nettoyer les surfaces à l'aide d'un chiffon doux humide. Ne jamais utiliser de solvants, de tampons à récurer, de produits abrasifs, d'eau de Javel, d'acides, de détergents puissants, de produits nettoyants chimiques agressifs ni de solutions de nettoyage à base de solvant pour nettoyer le produit. Lors de la mise au rebut du radiateur, celui-ci doit être déposé dans un centre de recyclage du métal et les réglementations locales doivent être respectées. Pour vous éviter de retourner un produit, des pièces manquantes ou endommagées peuvent être disponibles. Veuillez vérifier auprès du magasin si des pièces de rechange sont disponibles.

Guarantee Information

EN: This product has a manufacturer's guarantee of 15 years against manufacturing defects from the date of purchase or delivery for normal household use. To claim, present proof of purchase. The guarantee applies to new products and covers failures and malfunctions when used as intended and maintained according to instructions. It does not cover normal wear and tear, misuse, faulty installation, or ancillary costs. Guarantee rights are enforceable in the country of purchase.

FR: In France, in addition to the commercial guarantee, the seller is bound by the legal guarantee of conformity (articles L217-4 to L217-14 of the Consumer Code) and the guarantee against hidden defects (articles 1641 to 1648 and 2232 of the Civil Code). The distributor is responsible for conformity defects or hidden defects. Legal conformity guarantee (extract from Consumer Code): Article L217-4 - The seller must deliver goods conforming to the contract and is liable for conformity defects existing at the time of delivery. Article L217-5 - Goods conform to the contract if they are suitable for the usual purpose, match the description, and possess qualities presented. Article L217-12 - Claims for conformity defects are limited to two years from delivery. Legal guarantee for hidden defects (extract from Civil Code): Article 1641 - The seller is bound by the guarantee for hidden defects that render the item unfit for its intended use or diminish it significantly. Article 1648 - Claims for hidden defects must be made within two years of discovering the defect.

IMPORTANT - RETAIN THIS INFORMATION FOR FUTURE REFERENCE: READ CAREFULLY

Manufacturer Information

UK Manufacturer: Kingfisher International Products Limited, 3 Sheldon Square, London, W2 6PX, United Kingdom

EU Manufacturer: Kingfisher International Products B.V., Rapenburgerstraat 175E, 1011 VM Amsterdam, The Netherlands

For online manuals and product information:

• EN: www.kingfisher.com/products, www.screwfix.com, www.screwfix.ie
• FR: www.kingfisher.com/products