JOOLA 2000-S PRO Table Tennis Table Assembly Instructions
Article Number: 11502
Publication Date: 09.2021
Important Information Before Assembly and Use
Please read these Assembly Instructions and User Information carefully before assembling and using the JOOLA 2000-S PRO table tennis table. This document contains crucial safety advice for using the table. Retain these instructions for your reference, maintenance, and ordering of spare parts throughout the table's lifespan.
Key Assembly Requirements:
- Assembly requires a minimum of two adults.
- Ensure assembly takes place on a clean and soft surface.
- Before starting, verify all parts against the provided Parts List to confirm completeness and correctness.
- Follow the assembly steps in the indicated order (e.g., A, B, C).
- Refer to page III for explanations of text marks used in the instructions.
- Consult the Parts List on page IV for detailed information on part identification.
- Utilize the specified tools for each stage of the assembly process.
Important Usage and Safety Warnings
To ensure safe and proper operation, avoid the following:
- Improper Tightening: Do not over-tighten nuts on the safety unit (17) or the folding mechanism (11). This can prevent the red safety part from moving freely or hinder the table's ability to fold and unfold easily.
- Surface Stability: Do not use the table on uneven or unstable surfaces.
- Environmental Conditions: Do not expose the table to rain or use it outdoors in wet conditions.
- Table Tilt: Ensure the table is not tilted more than 10 degrees from a level position.
- Folding Safety: When folding or unfolding the table, ensure no people or objects are on or under it.
- Weight Load: Avoid placing heavy objects on the table.
Assembly Video Guide
A visual guide is available to assist with the assembly process:
Parts Identification and Diagram
The following section details the components required for assembly. Refer to the diagram for visual identification.
Structural Components:
The table frame consists of multiple structural parts identified by numbers: 1.1, 1.2, 1.3, 1.4, 1.5, 1.6, 1.8, 1.81, 1.82, 1.9, 1.10, 1.11, 1.12, 1.13, 1.14, 1.15.
Hardware and Accessories:
- Part 2: Bolt, M8x45 (Quantity: 2x)
- Part 3: Bolt, M6x30 (Quantity: 4x)
- Part 4: Wheel (Quantity: 2x)
- Part 5: Nut, M8 (Quantity: 2x)
- Part 6: Nut, M6 (Quantity: 4x)
- Part 7: Bracket (Quantity: 2x)
Assembly Steps
Follow these detailed steps to assemble your JOOLA 2000-S PRO table tennis table.
Step A: Attaching Brackets and Wheels to Table Halves
This procedure details the attachment of the wheel brackets and wheels to the individual table halves.
- A1: Attach bracket (Part 7) using bolt (Part 3) and component 1.
- A2: Secure wheel (Part 4) with bolt (Part 2), component 3, and nut (Part 5). Ensure a small gap of 0.2 - 0.5 mm is maintained between the parts.
- A3: Use the appropriate tool to tighten the nut securely.
Step B: Attaching Wheels to the Main Table Frame
This step illustrates the process of attaching the remaining wheels to the table's main frame structure.
- Attach the wheels using nut (Part 6).
