Product Overview
The JOOLA Aluterna is an outdoor-ready table tennis table designed for durability and playability in various conditions. It is described as weather-proof ☁️?️.
Important Usage Notes & Warnings:
- ❌ Do not place the table on uneven ground.
- ❌ Avoid exposure to strong winds.
- ❌ Do not tilt the table more than 10 degrees (indicated by ❌ >10°).
- The table is designed for both indoor and outdoor use.
Parts List
The following parts are included for assembly:
| Item | Description | Quantity | Part Number |
|---|---|---|---|
| 1 | Table Top Support Brackets (40mm x 40mm) | x2 | R-0-11650-01-128 |
| 2 | Leg Connectors | x4 | R-0-11200-02-128 |
| 3 | Central Support Connectors | x4 | R-0-7889-02-128 |
| 4 | Wheel Holders | x4 | R-0-11577-02-128 |
| 5 | Wheels | x8 | R-0-11577-02-128 |
| Set H1+H2+H3+H4 | Assembly Hardware Set | x1 | R-0-7887-40-128 |
| H1 | Support Rods (40mm) | x8 | R-0-7887-41-128 |
| H2 | Bolts (M8 x 60mm) | x8 | R-0-11127-42-128 |
| H3 | Nuts (M8) | x16 | R-0-7889-42-128 |
| H4 | Washers | x8 | R-0-11200-44-128 |
Assembly Instructions
Assembly requires two people. ??? x 2 !!
Step 1: Prepare Table Halves
Lay out the two halves of the table. Attach the wheel holders (part 4) and central support components (part 3) to the underside of each table half using the provided hardware.
Figure 1 shows the attachment of parts P5 (wheels) and other components to the table halves.
Step 2: Attach Legs and Supports
Connect the leg structures (parts P1, P2, P3, P4, P6, P7) to the table halves. Ensure all connections are secure. A "Push" action may be required for some fittings.
Figure 2 illustrates the connection of leg and support components, including the "Push" action.
Step 3: Install Wheels and Hardware
Attach the wheels (part 5) to the designated wheel holders. Install support rods (H1), bolts (H2), nuts (H3), and washers (H4) as shown in the diagrams to reinforce the structure.
Figure 3 details the installation of wheels and hardware sets H1-H4. Part P8 is also shown in this step.
Step 4: Final Structure Assembly
Continue assembling the frame, ensuring all components are correctly aligned and tightened. The table structure will begin to take its final form.
Figure 4 shows the progression of the assembly and reinforces the need for two people.
Step 5: Attach Net
Once the table is fully assembled, attach the net (P9) to the net posts. The net should be taut for optimal play.
Figure 6 illustrates the steps for attaching the net (P9) to the table.
Step 6: Folding and Unfolding
The table is designed for easy folding and storage. Follow the illustrated steps (A-F on page 6) to safely fold and unfold the table. Ensure the locking mechanisms are engaged when the table is in its playing position.
Diagrams A-F on page 6 show the sequence for setting up and folding the table. The table can be folded to a compact size for storage.
