JOOLA INSIDE J18 Table Tennis Table
Article Number: 11246
Version: 09.2021
Assembly and Safety Guidelines
This document provides instructions for the assembly and safe use of the JOOLA INSIDE J18 Table Tennis Table.
General Setup and Handling
- Diagram A: Illustrates the initial setup phase of the table.
- Diagram B: Depicts the process of folding the table.
- Diagram C: Shows two individuals involved in handling the table, indicating that some operations require two people.
Safety Warnings
Please adhere to the following safety precautions:
- ❌ Do not use the table if it is tilted.
- ❌ Avoid exposing the table to water, moisture, or strong winds.
- ❌ Do not use the table during rain or in wet conditions.
- ❌ Ensure the table is not tilted beyond 10 degrees.
- ❌ Keep the table away from heat sources or open flames.
- The table is designed for INDOOR use only. Outdoor use, especially in adverse weather (rain, storms), is prohibited.
- The standard EN 14468-1 is referenced for table tennis table specifications.
Parts and Hardware List
Verify all parts and hardware are present before beginning assembly.
| Item | Description | Quantity | Part Number |
|---|---|---|---|
| 1 | Table Halves | x2 | R-0-11127-01-110 |
| 2 | Leg/Support Assemblies | x4 | R-0-11200-02-110 / R-0-11200-03-110 |
| 3 | Feet / Locking Pins | x4 | (Not explicitly numbered in parts list, but shown in FIG.1 detail) |
| 4 | Net and Posts Assembly | x1 | (Not explicitly numbered in parts list, but shown in FIG.3) |
| H1 | M8 x 60mm Bolts | x8 | R-0-11127-41-110 |
| H2 | Nuts | x8 | R-0-11127-42-110 |
| H3 | Washers | x16 | R-0-11200-43-110 |
| H4 | Connectors/Fasteners | x8 | R-0-11200-44-110 |
| Kit | Assembly Hardware Kit (H1+H2+H3+H4) | x1 | R-0-11127-40-110 |
Assembly Steps
Follow these steps carefully for proper assembly:
Step 1: Attaching Leg Assemblies
FIG.1 illustrates the primary assembly of the table frame. Attach the leg/support assemblies (Item 2) to the main table frame (Item 1). Use M8 x 60mm bolts (H1), washers (H3), and nuts (H2), along with other fasteners (H4) as indicated. A detail view (3) shows the attachment of the adjustable feet or locking pins (Item 3) to the leg structure.
- Connect leg assemblies (2) to table frame (1) using H1, H3, H2, and H4.
- Ensure secure fastening for all connections.
Step 2: Setting Up the Table
FIG.2 shows the process of unfolding the table from a folded position to its playing configuration. This operation requires two people (⚠️ Requires 2 people).
Step 3: Installing the Net
FIG.3 provides a close-up view of attaching the net and posts assembly (Item 4) to the designated points on the table.
- Secure the net posts to the table edges.
- Attach the net to the posts.
Step 4: Final Check
FIG.4 displays the fully assembled JOOLA INSIDE J18 table tennis table.
Ensure all bolts are tightened and the table is stable before use.
