Printer Setup

Step 1: Power Connection

Connect the power adapter to the printer and then to a power outlet. The adapter supports both 115 VAC and 230 VAC.

Step 2: Label Insertion and Calibration

Insert the label straight and smoothly into the printer. The printer will automatically grab the label. Hold the feeder button until the blue light flashes twice for label calibration.

Mobile App Connection

Step 1: Download the Labelife App

Search for 'Labelife' on the App Store or Google Play to download the app. Alternatively, scan the provided QR code to download the app.

Step 2: Enable Bluetooth

Turn on Bluetooth from your phone's settings.

Step 3: Connect to Printer via App

Open the Labelife app and connect to the printer via Bluetooth. Note: For Android devices, the app may require location access and GPS authorization.

Printing on a Computer

Drucken auf einem Computer

Step 1: Power Connection

Connect the power adapter to the printer and then to a power outlet. The adapter supports both 115 VAC and 230 VAC.

Step 2: Label Insertion and Calibration

Insert the label straight and smoothly into the printer. The printer will automatically grab the label. Hold the feeder button until the blue light flashes twice for label calibration.

Step 3: Driver Installation

Download the corresponding driver for your computer system (Windows or macOS). Please run the driver installation to complete the setup.

Step 4: Open Link

Open the provided link to access further resources or the printer's web interface.

Appendix: Chrome Extension Installation

Please add the 'Labelife' extension in the Chrome Web Store. This extension is compatible with ChromeOS system computers and the macOS Chrome browser, but not with the Windows Chrome browser.

Application Introduction