Introduction
Welcome to the user manual for the AstroAI Smart Portable Air Compressor. This compact and versatile device is designed for inflating the tires of various vehicles, including automobiles, bicycles, and motorbikes, as well as sports balls. Its user-friendly operation makes it a convenient tool for everyday use. Additionally, the AstroAI Smart Portable Air Compressor can function as a flashlight and a power bank, adding to its utility.
Key Features & Safety
This manual provides essential information for operating the AstroAI OK81. Please read all instructions carefully before use. Key safety precautions include:
- Do not leave the product unattended during operation.
- Keep the product away from flammable or explosive materials.
- Avoid using the product in excessively humid or dusty environments.
- Continuous operation is recommended for a maximum of 12 minutes, followed by a 15-minute cool-down period to prevent overheating and potential damage.
- The connecting parts may become hot after inflation; allow them to cool before detaching.
- Dispose of the product responsibly and do not throw it into fire.
- The product operates at approximately 75 dB and should be used in suitable environments.
- This product is intended for adult use only.
Product Overview
The AstroAI OK81 features a clear LCD screen, intuitive buttons for power, settings, and pressure adjustment, and multiple ports for charging and output. It comes with various adapters for different inflation needs.
For detailed product specifications and dimensions, please refer to the product diagram and size information within the full manual.
Getting Started
Charging: Use a 5V/2A charger (sold separately) and the included Type-C cable to charge the device. The indicator light turns red while charging and green when fully charged.
Operation: Press and hold the Power Button for 2 seconds to turn the unit on or off. The compressor will automatically shut off after one minute of inactivity or when the battery is low.
Unit and Mode Selection: Press and hold the Settings Button to cycle through pressure units (PSI, Bar, kPa, kg/cm²). Short press the Settings Button to switch between preset inflation modes: bike, motor, car, and basketball.
Pressure Setting: Use the '+' and '-' buttons to set the desired pressure. The value will flash and auto-set once the target pressure is reached.
Air Hose Connection: Connect the air hose securely to the compressor and the valve you wish to inflate.
Support and Information
For further assistance or to explore other AstroAI products, please visit the official AstroAI website.
