Sun Joe SPX-FC26 Assembly Quick Guide
This guide provides instructions for assembling the Sun Joe SPX-FC26 Snow Foamer Cannon with various Sun Joe pressure washer models.
For questions or comments, contact the Sun Joe customer service department at: 1-866-SNOWJOE (1-866-766-9563).
Assembly Instructions by Series
SPX200/1000 Series
Components: Trigger gun (Pistola/Pistolet), Middle wand (Vara intermedia/Lance intermédiaire), Foam cannon, Locking collar (Collarín de trabado/Bague de blocage).
Instructions:
- Disconnect the spray wand assembly so only the middle wand remains attached to the trigger gun.
- Align the two tabs on the foam cannon with the middle wand.
- Insert the tip of the locking collar on the foam cannon into the middle wand and twist counter-clockwise to lock.
- Adjust the foam cannon as needed. Use the locking collar to secure the attachment.
SPX2000, SPX2500, SPX2600, SPX4003, SPX4003-ULT Series
Components: Trigger gun (Pistola/Pistolet), Foam cannon, Locking collar (Collarín de trabado/Bague de blocage).
Instructions:
- Detach the spray wand from the trigger gun if not already done.
- Align the two tabs on the foam cannon with the trigger gun.
- Insert the tip of the locking collar on the foam cannon into the trigger gun and twist counter-clockwise to lock.
- Adjust the foam cannon as needed. Use the locking collar to secure the attachment.
Most SPX2000 Series + SPX4003-ELT, SPX7001E Series
Components: Trigger gun (Pistola/Pistolet), Foam cannon, Locking collar (Collarín de trabado/Bague de blocage).
Instructions:
- Detach the spray wand from the trigger gun if not already done.
- Align the two tabs on the foam cannon with the trigger gun.
- Insert the tip of the locking collar on the foam cannon into the trigger gun and twist counter-clockwise to lock.
- Adjust the foam cannon as needed. Use the locking collar to secure the attachment.
Most SPX3000 and SPX4000 Series
Components: Trigger gun (Pistola/Pistolet), Transfer adapter (Adaptador de transferencia/Raccord de transfert), Foam cannon, Locking collar (Collarín de trabado/Bague de blocage).
Instructions:
- Detach the spray wand from the trigger gun if not already done.
- Attach the transfer adapter to the trigger gun.
- Align the two tabs on the foam cannon with the transfer adapter.
- Insert the tip of the locking collar on the foam cannon into the transfer adapter and twist counter-clockwise to lock.
- Adjust the foam cannon as needed. Use the locking collar to secure the attachment.
Using the Foam Cannon
Soap Knob Adjustment
There is a soap knob on the top of the SPX-FC26. Turn it clockwise to release soap and counter-clockwise to stop the soap flow.
Spray Adjustment
Adjust the amount of soap released by turning the front part of the SPX-FC26. Turn clockwise for a wider spray pattern and counter-clockwise for a more focused spray.
Detergent Recommendations
Only use detergents specifically recommended for pressure washers, such as:
- Sun Joe® HOUSE + DECK WASH (SPX-HDC1G)
- Sun Joe® SNOW FOAM AUTO WASH (SPX-FCS1G)
- Sun Joe® HEAVY DUTY CLEANER (SPX-APC1G)
Important: Do NOT use household detergents, acids, alkaline solutions, bleaches, solvents, flammable materials, or industrial-grade solutions, as these can damage the pump.
