Sun Joe SPX-ESW4 Assembly Quick Guide

Assembly Diagrams

The guide illustrates the components of the extension wand assembly for different Sun Joe pressure washer series:

SPX3000/SPX4000/SPX9000 Series

• Trigger gun
• Transfer adapter
• Extension wand first piece
• Locking collar
• Adapter
• Spray wand

SPX2000/SPX6000/SPX7000 Series

• Trigger gun
• Extension wand first piece
• Locking collar
• Spray wand

SPX200/SPX1000 Series

• Trigger gun
• Middle wand
• Extension wand first piece
• Locking collar
• Spray wand

Assembly Instructions

For SPX3000/SPX4000/SPX9000 Series:

1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the first piece of the extension wand and align the two tabs with the inside of the transfer adapter.
4. Once aligned, push in the extension wand and twist counter clockwise to lock the wand into the trigger gun.
5. Use the locking collar to secure the wand in place. Move up and twist to lock.
6. Attach your spray wand with the adapter provided to the top of the extension wand.

For SPX2000/SPX6000/SPX7000 Series:

1. If not already done, detach your spray wand from your trigger gun.
2. Take the first piece of the extension wand and align the two tabs with the inside of the gun.
3. Once aligned, push in the extension wand into the trigger gun, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
5. Finally, attach your wand to the top the extension wand.

For SPX200/SPX1000 Series:

1. Disconnect your spray wand assembly so that only the middle wand remains attached to your trigger gun.
2. Take the first piece of the extension wand and align the two tabs with the inside of the middle wand.
3. Once aligned, push in the extension wand into the middle wand, twist counter clockwise to lock into trigger gun.
4. Use the locking collar to secure the wand in place. Move up and twist to lock.
5. Finally, attach your wand to the top the extension wand.

Note: To connect any other accessory to the extension wand, align it with the top of the wand, push down and turn counter clockwise to lock into place.