Introduction
The OREI UHDS-102 is an advanced 1x2 HDMI 18Gbps Splitter designed for synchronously splitting HDMI content to two HDMI outputs. It delivers high-performance audio and video up to 4K2K@60Hz (4:4:4) resolution and supports a bandwidth of up to 18Gbps without data loss. The device is capable of receiving, retiming, and transmitting signals.
Features
- HDMI 2.0b, HDCP 2.2 compliant
- Supports resolutions up to 4K2K@60Hz with 24bit RGB/YCBCR 4:4:4
- VESA format support up to QSXGA@60Hz
- Compatible with LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio
- Built-in equalizer, retiming, and driver for signal integrity
- Smart EDID management: STD (1080p) mode and TV (copy OUT1) mode
- Compact design for easy and flexible installation
Package Contents
| Item | Quantity |
|---|---|
| 1x2 HDMI 18Gbps Splitter | 1 pcs |
| 5V/1A Power Adapter | 1 pcs |
| User Manual | 1 pcs |
Specifications
Technical
| Video Bandwidth | 600MHz/18Gbps |
| Input Port | 1×HDMI Type A (19-pin female) |
| Output Ports | 2×HDMI Type A (19-pin female) |
| Video Resolution | 4K2K@24/25/30/60Hz |
| ESD Protection | Human body model: ±8kV (Air-gap discharge); Contact discharge: ±4kV |
Mechanical
| Chassis Material | Metal |
| Silkscreen Color | Black |
| Power Consumption | 2W |
| Weight | 165g |
| Power Supply | Input: AC100 - 240V 50/60Hz, Output: DC 5V/1A (US/EU standards, CE/FCC/UL certified) |
| Dimensions | 56 mm(W)×100 mm(D)×16mm(H) |
| Operating Temperature | 0°C ~ 40°C / 32°F ~ 104°F |
| Storage Temperature | -20°C ~ 60°C / -4°F ~ 140°F |
| Relative Humidity | 20~90% RH (non-condensing) |
Operation Controls and Functions
The UHDS-102 features controls and indicators on its front and rear panels. The following table describes each numbered item:
| No. | Name | Function Description |
|---|---|---|
| 1 | POWER LED | This blue LED illuminates when the device is connected to a power supply. |
| 2 | IN LED | This blue LED illuminates when the source device is connected to the input port. |
| 3 | OUT LED | These blue LEDs illuminate to indicate which HDMI output port is connected to an active TV, display, or monitor. |
| 4 | EDID STD | When in 'STD' mode, the unit uses its built-in EDID settings. The video output is set to 1080p@60Hz and audio output to LPCM 2CH Stereo. |
| 5 | EDID TV | When in 'TV' mode (COPY OUT1), the INPUT EDID is set to COPY OUT1. The unit supports a Downscaler function: If the HDMI OUT1 port is connected to a 1080P TV, all output is bypass. If the HDMI OUT1 port is connected to a 4K TV, 4K output is bypass, but 1080P output will be downscaled. |
| 6 | HDMI OUT 1~2 | Connect each of these HDMI outputs to an HDMI display for simultaneous distribution, or cascade to another splitter to extend operating distance. |
| 7 | HDMI IN | Connect the input port to the HDMI output of your source device (e.g., DVD player, set-top box) using an HDMI cable. |
| 8 | DC 5V | Plug the 5V DC power supply into the unit and connect the adapter to an AC outlet. |
Application Example
This section illustrates a typical setup for the OREI UHDS-102 1x2 HDMI 18Gbps Splitter.
Diagram Description:
The diagram depicts the UHDS-102 splitter in a home theater or AV setup. A source device, such as a Blu-ray player or set-top box (labeled 'HDMI INPUT'), is connected to the splitter's 'HDMI IN' port using an HDMI cable. The splitter then distributes the signal to two displays, labeled 'HDMI OUTPUT-1' and 'HDMI OUTPUT-2'. The maximum recommended cable length for these connections is 30 feet (MAX 30 FT).
Important Note: The diagram includes a visual representation of a soundbar with a red 'X' mark over it, signifying that this splitter is NOT FOR EXTRACTING AUDIO. Its primary function is video signal distribution.
The system is capable of transmitting video signals up to 4K resolution at 60Hz.
Support and Registration
Warranty Activation: To activate your product warranty, please register online at www.orei.com/register.
Technical Support
OREI provides dedicated Technical Support to assist users. The team can answer questions, offer technical advice, and help troubleshoot installation issues to ensure projects are completed on time and within budget. Users are encouraged to contact support via call, email, or live chat.
OREI Live Technical Support Hours:
For the US team (serving US/Canada/Mexico): Monday through Friday, 9 a.m. to 6 p.m. Central Time.
Support Email: info@orei.com
Support Number: 877-290-5530
Live Chat: For real-time assistance, visit www.orei.com to access the live chat feature.
Video Tutorial: Access a video guide on how to use the product by scanning the provided QR code [QR code for video tutorial].
OREI | Pro AV Solutions & Audio Video HDMI Accessories – OREI.COM
