HDMI Splitter
1 x 2
User Manual VER:1.1
I. INTRODUCTION
The 1 x 2 HDMI splitter distributes 1 HDMI source to 2 HDMI displays simultaneously. It offers HD video solution for supermarkets, shopping malls, HDTVs, STBs, DVDs, projector factories, data control centers, information distribution, conference room presentations, education and training, corporation showrooms, home theaters, etc.
II. SPECIFICATIONS:
| Input Video Signal | 0.5 -1.0 volts p-p |
| Input DDC Signal | 5 volts p-p (TTL) |
| Max Single Link Range | 1920X1080, 1080P |
| Resolutions DTV/HDTV | 480p/576i/576p/720p/1080i/1080P, 4K60(4:2:0) |
| HDMI Version | HDMI 1.4 |
| Operating Frequency | Up to 225MHz |
| EIDI Duration | 4 seconds |
| Power supply | DC 5V |
III. CONNECTION
a). Connect the input source and output displays to the HDMI Splitter. *Please refer to the Connection Image.
b). Connect the DC 5V power supply to the splitter. Please kindly note that power supply with higher voltage may damage the splitter.
c). When input source and output displays are connected and turned on, the corresponding LED will light.
Attention: In order to protect the splitter and your devices, please make sure the splitter is powered off before you attach in or extract video source and displays. Please insert and extract HDMI cables gently.
IV. INTERFACE
Diagram Description: The interface diagram shows the top and front views of the HDMI splitter. The top view shows a DC/5V power input socket (labeled 2) and an HDMI input port (labeled 3). The front view shows a power LED (labeled 1) and an HDMI input LED (labeled 4). Below these are two HDMI output ports (labeled 5 and 8) and their corresponding LEDs (labeled 6 and 7).
Labels:
- 1: Power LED
- 2: Power Supply Socket
- 3: HDMI Input
- 4: LED of HDMI Input
- 5: HDMI1 Output
- 6: LED of HDMI1 Output
- 7: LED of HDMI2 Output
- 8: HDMI2 Output
V. BOX CONTENTS:
| Item | Qty | Remark |
| HDMI splitter 1 × 2 | 1 PCS | |
| Power | 1 PCS | DC5V/1A |
| User Manual | 1 PCS | en |
VI. FAQ
A). The splitter doesn't appear to be functioning.
Firstly, check if the LED lights, if the power supply is in good condition and well connected. Secondly, make sure all cables are in good condition and well connected. Thirdly, make sure the length of the cables is within the maximum supported length of this splitter. Lastly, please try to connect the input source to the display directly to see if it displays normally.
B) If the maximum resolution the two displays supported is not the same, what resolution will be displayed?
The splitter will display at the lower one to both displays.
VII. CONNECTION
Diagram Description: This diagram illustrates the connection setup for the HDMI splitter. A source device, such as a Blu-ray player, STB, DVR, Xbox 360, or PS3, is connected via HDMI to the '1 x 2 HDMI Splitter'. From the splitter, two HDMI output cables lead to two separate displays, labeled '2x HDMI OUT'.
Related Documents
 |
OREI UHDS-102 1x2 HDMI 18Gbps Splitter User Manual for 4K@60Hz Video Distribution User manual for the OREI UHDS-102, a 1x2 HDMI 18Gbps splitter supporting 4K@60Hz (4:4:4) resolution and 18Gbps bandwidth for high-performance audio-video distribution. Includes features, specifications, and operational guidance. |
 |
OREI UHDS-102 1x2 HDMI 18Gbps Splitter User Manual User manual for the OREI UHDS-102, a 1x2 HDMI 18Gbps Splitter supporting 4K@60Hz (4:4:4) resolution, HDCP 2.2, and advanced EDID management. Learn about its features, specifications, operation, and application. |
 |
OREI BK-22 8K Two-Input Dual View HDMI Splitter User Manual User manual for the OREI BK-22, an 8K Two-Input Dual View HDMI Splitter. Features include HDMI 2.1, HDCP 2.3, 40Gbps bandwidth, and support for up to 8K@60Hz resolution. Details specifications, operation, and application examples. |
 |
OREI UHD12-EXB400-K: 18Gbps HDMI 1x2 Splitter Over CAT6 Up To 400ft User Manual User manual for the OREI UHD12-EXB400-K, an 18Gbps HDMI 1x2 Splitter over CAT6, extending signals up to 400ft with 4K@60Hz resolution. Features include HDBaseT technology, IR/RS-232 control, and PoE. Provides detailed specifications, operation controls, EDID modes, ASCII commands, and an application example. |
 |
OREI UHDS-104 1x4 HDMI 18Gbps Splitter User Manual User manual for the OREI UHDS-104 1x4 HDMI 18Gbps Splitter, detailing its features, specifications, operation, and application examples for high-quality HDMI distribution. |
 |
OREI HDMI 1.4 Splitter 1x4 User Manual User manual for the OREI HDMI 1.4 Splitter 1x4, detailing its features, specifications, package contents, front and rear panel controls, and application examples. |
 |
OREI UHDS-104A: 1x4 HDMI 2.0 Splitter with Scaler and Audio Extraction User Manual User manual for the OREI UHDS-104A 1x4 HDMI 2.0 Splitter. Learn about its features, technical and mechanical specifications, operation controls, and application examples for 4K@60Hz video and audio extraction. |
 |
OREI UHDS-202 18Gbps 2x2 HDMI Matrix Switcher with Audio Extractor User Manual User manual for the OREI UHDS-202, an 18Gbps 2x2 HDMI Matrix Switcher with Audio Extractor. This guide details features, technical and mechanical specifications, front and rear panel operations, IR remote functions, frequently asked questions, and application examples for seamless audio-visual distribution. |